Elementos

STEIN SMB1000 Lowering Bollard

STEIN SMB1000 Fixed Lowering Device 1000kg WLL The STEIN SMB1000 single bollard lowering device has a WLL of 1000kg and designed to work effectively with ropes of up to 14mm (Recommended Rope - STEIN Omega 12mm or 14mm). The line is guided down to the bollard and managed by fairleads both front and rear. To help prevent damage to the tree the device is fitted with 2 replaceable heavy duty Tree Protection Rubbers made from a hardwearing blend of SBR/NR rubber. The device weighs in at just 4.4kg so can easily be mounted by one person utilising the top suspension point with the recommended STEIN Mounting Strap (SS-RCP6004). For added security it is recommended the device is backed up by securing a sling to the base anchor point terminated in a self-tightening hitch such as a cow-hitch or timber-hitch. (Recommended Sling - STEIN 20mm Multi-Sling SS-3372008005). Ratchet Strap Specifications Supplied with a specially designed ratchet strap fitted with Carbon Steel hooks with Keeper Pins to prevent the mounting hooks detaching from the device when not under tension. The webbing is made from a high tenacity 50mm wide polyester yarn and is UV resistant with a 6000kg breaking strength. This strapping system allows the device to be fitted to tree with a diameter of up to 145cm. The ratchet meets the requirements of the European Load Restraint Legislation Standard EN12195-2:2001 which requires the buckle to have a lashing capacity (LC) of 1000daN. This capacity is stamped on the ratchet together with a label for full traceability. The breaking strength (BS) of 2000Kg is also shown to indicate the maximum load that can be applied to the buckle before failure. STEIN SMB1000 SPECIFICATIONS Working Load Limit: Dimensions: Bollard Dimension: Materials: Fairleads: Body Finish: Bollard Finish: Rubbers: Rubber Material: Rubber Hardness: Strapping System: Webbing length: Weight: 1000kg (WLL) refer to manual 210mm (w) x 310mm (h) 73mm diameter x 140mm (l) Back Plate 5mm Steel 15mm Solid Bar Powder coated Lacquered with Rust Prevention 148mm (l) x 50mm (w) x 50mm (h) SBR/NR rubber 70 medium/hard (Shore A Scale) Ratchet Handle with tail 4.65m (5.0m combined with Ratchet Handle) 4.4kg (excluding Ratchet Strap) 5.8kg (Including Ratchet Strap)

$424.95

STEIN ELEVATE Climber Kit - 43mm Gaffs (Blue)

ELEVATE your Climb The all-new STEIN ELEVATE Climbing Spurs. The one-piece Aluminium Shank has a 5-degree off-set tilt which allows the spur to align with your stance, and facilitates the downward force required straight from the leg through the gaff into the pole or trunk. The shank is hard anodised to help protect the aluminium and prolong its durability. The shank is fitted with a series of adjustment holes giving a 90mm height variant. Specially designed threaded inserts are used to attach the Calf Pad which avoids threading the holes in the spurs alleviating any cross-threading issues. As all climbers' lower legs and calves are different the ELEVATE Calf Pad is manufactured from 2mm Aluminium which can be manipulated to your carf width unlike solid pads. This feature allows for a more secure fit around your calf. The Calf Pad is fully height adjustable with a 90mm variant in height and has the option to be off-set by 4-degrees to help facilitate climber comfort. The washable Inner Pad is ribbed vertically for added comfort and aids ventilation, the pad is secured in the Aluminium shell via heavy duty hook & loop. The ELEVATE Spurs are secured to the leg using 100mm wide Hook & Loop system and a traditional synthetic leather strap with buckle for a secure comfortable fit. Warning Activities using this type of equipment are inherently dangerous. It is not possible to cover every eventuality relating to the use of this equipment. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Only the techniques shown in the diagrams are authorised. Any other use deviating from those shown may result in serious injury or death. Prior to each use a complete risk assessment must be carried out to ascertain that the device chosen configures with and is appropriate to the work being undertaken. As part of any method statement we recommend that all users of this equipment are given a copy of the instructions. They must read them, understand them and explicitly follow all instructions and cautions attached. Any person using this equipment should be fully trained and competent in its use

$399.00

Split Suspension Arborist Saddle

Provides superior comfort and support in the vs. other traditional harnesses. Economical choice for use with split tail system. The 5 1/2" back support is constructed of rubberized belting material, 1/4" thick foam, and lined with soft top grain leather for longer life. Seat is constructed of 3" wide cotton webbing reinforced with 1 3/4" nylon and lined with soft top grain leather. Accessory ring and snap on each side. Weighs approximately 6 lb. Specifications Manufacturer: Buckingham Manufacturing Weight: Approx. 6 lb Made in the USA

$245.00

Elementos

Saw Giveaway!

Our best sellers

Subscribe to our emails