Mobile navigation
Main menu
Article Title
Read more
Items
View collection
New!
Get these items while you can!
Giveaway
Contact
In Stock!
Back in stock!
Subscribe and Save!
Your cart is empty
There are no items in your cart.
View
Filters
Price
$ 0
$ 490
Zero Gen2 Chainsaw Trousers By Clogger
WHY CLOGGER MADE THIS: Designed for the climbing arborist who works in hot conditions, these pants are cool and light but still tough with a ripstop outer and abrasion resistant sections. CERTIFICATIONS: UL Certified to ASTM F1897-14. Meets OSHA regulation 1910-266. The Gen2 Zero arborist chainsaw pants are the proven next level chainsaw pants design. You are able to stretch, climb and jump freely with the confidence. Cooling is taken care of with two high efficiency vents, open leg design for air flow, super breathable fabric and Nilit Breeze fibers to wick heat from the body. Zeros exceed US standards for coverage by 15% and chainsaw threshold speed by 25%. Light weight does not mean less safe. Durability is a big focus. The outer is amazingly durable with high tenacity nylon rip stop and incredible all way stretch. The super tough Dyneema fabric on the right calf increases durability in a key wear zone where the hanging chainsaw causes premature wear. Upgraded zippers and elasticized thread in the seat reduce the risk of failure in these areas. What people are saying "Great on the ground, great in the air, why would you wear anything else??" "Super light weight and cool in summer" "I don't even take these pants off after work, too damn comfortable" Key features of the Zero chainsaw pants include: UL Certified to ASTM F1897-14 and meets OSHA regulation 1910-266 Uses Arrestex HP advanced chainsaw protection material which is light, cool and quick drying, rated to 3,500 ft/min (750 ft/min above the standard) Also certified to exceed 20 m/s according the NZ/AU standard Lightweight design, just 2 lbs 3 oz Outer fabric, engineered to lower body temperature by dispersing body heat through breathability and the use of Nilit® Breeze yarn - Nilit® is proven to reduce body temperature 4-way stretch fabric for greater freedom of movement and flexibility with elasticized thread in the seat for extra give High-tenacity nylon and a ripstop weave for a 1.5x stronger outer Abrasion resistant fabric over the knee, the inside of the calf and ankle areas increasing the durability in these high wear areas. Ultra-high tear strength Dyneema fabric at the right calf to protect against small cuts caused by the chainsaw when hanging off the harness Elasticized waist for a snug fit and extra comfort Wide belt loops to fit up to 2 inch belt Stronger and more durable zippers with a better seal to reduce the risk of sawdust damage Special zipper pulls on the pockets to make accessing your pockets easy even when wearing gloves Two zipped hip pockets; two zipped thigh pockets individually sewn to be able to remove saw dust with additional pocket on the left thigh, all accessible while wearing a harness High-visibility panels front and rear Tough, large always open mesh vents at rear of both legs for cooling Lace hooks to prevent the pants from riding up Slim fit with a just the right amount of fabric for easily movement Sizing Men Note 1: IMPORTANT Our climbing pants across Tall, Standard and Short, all include an additional 6cms/2.5 inches of length to allow for lift from the harness and knee flex/bending while climbing. Note 2: These garments are designed to be 'mid-rise', i.e. the top of the waistband will sit on the top of the hips, not as high as the natural waist. Mens Size Waist (in) Approx Jeans Equivalent Waist Size (In) Standard Inleg (in) Short Inleg lengh (In) Tal Inleg Length (in) 2XS 28-30 27 30 27.5 32 XS 30.5-32.5 30 31 28 33 S 33-35 32 31 29 33.5 M 35.5-37.5 35 32 29 34 L 38-40 37 32 30 34.5 XL 40-42 39 32.5 30 35 2XL 43-45 42 32.5 30 35 3XL 45-47 44 32.5 30 35 Women Note 1: IMPORTANT Our climbing pants across Tall, Standard and Short, all include an additional 6cms/2.5 inches of length to allow for lift from the harness and knee flex/bending while climbing. Note 2: If working from actual body measurements, firstly determine the hip/seat size. Note 3: These garments are designed to be 'mid-rise', i.e. the top of the waistband will sit on the top of the hips, not as high as the natural waist. Womens Size Waist (in) Hip/Seat (In) Aprox Size (W - US) Standard Inleg (in) Short Inleg lengh (In) Tal Inleg Length (in) 2XS 31-33 35 4 28 26 31 XS 33-35 37 6 29 26.5 31 S 35-37 39 8 29 27 31.5 M 37-39 41 10 29.5 27 32 L 39-41 43 12 30 27.5 32 XL 41-43 45 14 30 28 33 2XL 43-45 47 16 30 29 33 Ships directly from Clogger
DefenderPRO Gen2 Tough UL Men's Chainsaw Pants By Clogger
Clogger’s toughest chainsaw pants are now even cooler. When your day involves a little of everything or beating through thickets of thorns, then the DefenderPRO chainsaw pant is for you. Tough with full flex thanks to the ripstop Cordura® outer with 4-way stretch. And when the heat is up the new huge cross flow vents will keep you cool. Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for rotation if a chainsaw strikes. Outer construction and design Outer fabric is tough and breathable Cordura® ripstop outer. 4-way stretch fabric for greater freedom of movement with FlexZone in the seat seam for extra give. PFC free DWR outer to repel water and oil. Elasticized waist for a snug fit and extra comfort. Lock stitched seams and reinforced stress points. Tree people specific detail NEW - 2 huge cross flow mesh side vents for maximum cooling. NEW - UL label located at rear for easy visibility. 1 zipped pocket on thigh ideal for cellphone or accessories - accessible while wearing a harness. Strong, durable zippers with a tight seal to reduce the risk of sawdust damage. Special zipper pulls on the pockets to make accessing your pockets easy even when wearing gloves. Wide belt loops to fit up to a 2 inch belt. Mesh lining for enhanced breathability. Opening at hems to remove debris. Weight Lightweight design, just 2.2 lb (Medium). Options Protection: Front only. Fit: Men's or Women's Size: 2XS - 3XL. Leg Length: Short, Standard, Tall. Note 1: IMPORTANT These pants across Short, Standard, and Tall all include an additional 5cms/2 inches of length to allow for lift from kneeling and knee flex/bending.Note 2: These garments are designed to be 'mid-rise', i.e. the top of the waistband will sit on the top of the hips, not as high as the natural waist. Fits Top of Hip Range Size CM IN 2XS 72-77 28-30 XS 78-83 30.5-32.5 S 84-89 33-35 M 90-95 35.5-37.5 L 96-101 38-40 XL 102-107 40-42 2XL 108-113 43-45 3XL 114-119 45-47 Standard - Fits Person With Inleg Length Size CM IN 2XS 77.5 30.5 XS 78.5 31 S 79.5 31 M 80.5 32 L 81.5 32 XL 82.5 32.5 2XL 82.5 32.5 3XL 82.5 32.5 Short- Fits Person With Inleg Length Size CM IN 2XS 71.5 28 XS 72.5 28.5 S 73.5 29 M 74.5 29 L 75.5 30 XL 76.5 30 2XL 76.5 30 3XL 76.5 30 Tall - Fits Person With Inleg Length Size CM IN 2XS 83.5 33 XS 84.5 33 S 85.5 33.5 M 86.5 34 L 87.5 34.5 XL 88.5 35 2XL 88.5 35 3XL 88.5 35 Approx Jeans Equivalent Waist Size Size CM IN 2XS 69 27 XS 75 30 S 81 32 M 87 35 L 93 37 XL 99 39 2XL 105 42 3XL 111 44 Ships directly from Clogger
Denim Men's UL Chainsaw Pants By Clogger
WHY WE MADE THIS: Designed with a classic denim look in mind, these jeans not only look good but have the hidden benefit of chainsaw protection. Lightweight yet tough, Denims are constructed with a durable abrasion resistant blend with stretch for easier movement. CERTIFICATION: Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266. GET THE EVERYDAY DENIM LOOK WITH FULL HIGH PERFORMANCE CHAINSAW PROTECTION Are you sick of the power ranger look and want chainsaw protection that ticks all the safety boxes while remaining both comfortable and casual looking? Introducing Denim from Clogger. Clogger's first chainsaw protective pant designed for a more traditional, laid back look. Clogger Denims are lightweight (2 lb 3 oz - size medium) with stretch that is flexible and easy to work in. Available in front protection style only with short and tall leg variations.Note: Denims do not have an elasticized waist so tend to run small compared with our other chainsaw pants. WHAT PEOPLE ARE SAYING “I love my Clogger Denims! The pockets are spot on. The phone pocket is perfect. My phone stays in one place and doesn't move around. I'll say this right now and here - I'm not buying anything but Clogger pants from here on out” “I have mine on as we speak and love them! Climbed half day, ground half day, then went finished up with servicing equipment. Great all around pants. Zippered phone pocket is clutch. I have noticed almost no difference in restriction of movement while climbing.” “I own multiple pairs of chainsaw protection. But I love my pair of denims. I'm looking forward to buying my crew some.” Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for movement if a chainsaw strikes. Outer construction and design Outer is constructed with an advanced stretch-woven fabric made from cotton, nylon and stretch polyester fibers that delivers an extremely high level of durability and light stretch without sacrificing structure. FlexZone in the seat seam for extra give. Straight jean cut with regular fit through hip and thigh and straight through the leg. Lock stitched seams and reinforced stress points. Tree people specific detail Classic Denim pocket styling with 2 front, 2 back. 1 zipped pocket on the thigh ideal for cellphone or accessories - accessible while wearing a harness. Strong, durable zippers with a better seal to reduce the risk of sawdust damage. Wide belt loops to fit up to a 2 inch belt. Mesh lining for enhanced breathability. Opening at hems to remove debris. Weight Lightweight design, just 2 lbs 3 oz (Medium). Options Protection: Front only. Fit: Men's or Women's Size: XS - 3XL. Leg Length: Short, Standard, Tall. Ships directly from Clogger
Zero Light and Cool UL Chainsaw Chaps Apron Style By Clogger
WHY WE MADE THIS: Redesigned for professional ground tree crews and landscapers. These cool, lightweight chainsaw chaps are made to provide a much more comfortable experience in warm conditions. CERTIFICATION: Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266 Looking for the coolest, lightest, safest chainsaw chaps on the planet? Get Clogger Zero Chainsaw Chaps. A breath of fresh air in cool chainsaw chap design. Developed to protect not only against chainsaws but to reduce the heat buildup from physical exertion especially in hot environments. Zero chainsaw chaps are lightweight and breathable, adding protection rather than weight and helping you stay cool as the work becomes hot and heavy. Zero professional chainsaw chaps are 30% lighter than alternatives but offer up to 15% more protective area with true waist to ankle coverage. You also get the 5-strap attachment system needed to ensure that the chaps are effective if stuck. What people are saying "These chaps are a huge improvement over the regular chaps from the leading manufacturers, they are way cooler & way more comfortable, you'll forget you even have them on!" Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage. Outer construction and design Tough, breathable, high tenacity nylon outer with DWR to repel water and oil. Soft poly-cotton lining. 2 inch wide belt with quick release buckle. The adjustable waist extends to 49 inches. An additional 18 inch extension belt is available if required. Tree people specific detail 5 rugged polypropylene straps to ensure a comfortable and an ultra-secure, safe fit. Tough buckles designed for long life and to withstand crushing. High-visibility panels. NEW - Leg buckles are replaceable. Easily replace in the field if damaged or broken. NEW - Each pair comes with a set of 2 replaceable buckles. Weight Lightweight design, just 2 lbs 3 oz (Medium). Ships directly from Clogger
Ember Men's UL Chainsaw Pants For Winter By Clogger
CERTIFICATION :Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266. WHY WE MADE THIS: For arborists that work outside in the cold winter, these are a thermal heating engine. Temps below 50F/10C these are your go to winterproof pant for staying warm and dry and most importantly, comfortable. FRONT WITH 360 CALF PROTECTION IN SHORT AND TALL LEG VARIANTS:Front with 360 calf protection in short and tall variants are made to order products which have an additional lead time of 1-2 weeks The triple layer, windproof Ember laminate shell is constructed from a durable 4-way high tenacity stretch outer, a windproof moisture wicking TPU membrane and a warm fleece inner. Ember is designed to help you stay warm and dry while still delivering full flex and keeping the weight down. Zipped vents can be opened for moisture control when required and closed to keep you warm. Water resistant gaiters stop snow, water and cold air from entering at the ankle. All of this is delivered while improving safety and performance. Recommended for use in temperatures below 50 F / 10 C. Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for movement if a chainsaw strikes. Outer construction and design The Ember shell is constructed of 3 layers including a high-tenacity, ripstop nylon exterior layer with a PFC-Free DWR water resistant coating, a middle windproof moisture wicking TPU membrane and warm fleece lined inner. Get maximum movement with the 4-way stretch outer and FlexZone in the seat seam for extra give. Designed to last with high wear areas protected using abrasion resistant fabric over the lower leg. Stay dry and warm with built in water resistant gaiters to keep cold air, snow and slush out. Elasticized waist for a snug fit and extra comfort. Lock stitched seams and reinforced stress points. Tree people specific detail Have full temperature and moisture control with two welted lower thigh vents that seal wind out when zipped closed. Get easy access to everything that you need with four highly functional secure zipped side pockets (two accessible in the harness) - all pockets can be pulled out to empty saw dust and have easy grip zipper pulls for use with gloves. A high back for better protection from the cold and comfort in the harness. Keep the bottom of your pants from riding up without snagging using Clogger’s unique boot hook system. Opening at hems to remove debris. Weight Midweight design, just 3 lbs (Medium). Options Protection: Front only or 360 calf wrap for additional protection. Fit: Men's or Womens Size: XS - 3XL. Leg Length: Short, Standard, Tall. Ships directly from Clogger
DefenderPRO Tough Oil and Water Resistant UL Chainsaw Chaps Apron Style By Clogger
Strength re-engineered. DefenderPRO tough chainsaw chaps bring together the latest in technical fabric and design to redefine long lasting and rugged. The outer fabric is constructed from a new grade of specially developed nylon, increasing cut and abrasion resistance. Added to this is an oil and water resistant coating. DefenderPRO chaps are tough. They are practical. They are ready to defend. Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage. Outer construction and design 1,000 denier, high-tenacity nylon outer covering with oil and water resistance. Soft poly-cotton lining. 2 inch wide belt with quick release buckle. Tree people specific detail 5 rugged polypropylene straps to ensure a comfortable, safe and ultra-secure fit. Tough buckles designed for a long life and to withstand crushing. NEW - Leg buckles are replaceable. Easily replace in the field if damaged or broken. NEW - Each pair comes with a set of 2 replaceable buckles. Weight Lightweight design, just 2 lbs 6 oz (Medium). Ships directly from Clogger
TreeCREW UL Men’s Chainsaw Pants By Clogger
SKU:TU11DWHY WE MADE THIS:If it sucks putting chaps on and off all day then these are the answer. No more straps to do up. No flappy protective material. Good honest, chainsaw pants.CERTIFICATION:Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266 TreeCREW - Clogger’s Most Affordable Line of Chainsaw Protection. We understand that chainsaw protection can be expensive and there are budgets to meet. TreeCREW is the answer. With no sacrifice being made on the comfort or safety features that many Clogger fans know and love, TreeCREW are a no compromise, affordable chainsaw pant. Featuring Clogger’s unique, breakthrough Arrestex HP light chainsaw protection that exceeds UL Certification standards and coverage requirements. This is then combined with great durability and flex performance resulting in maximum comfort and ease of movement as you go about your work day.Whether you are buying as an individual or buying for your crew, Clogger TreeCREW are the no nonsense Chainsaw Pants for every tree worker. What people are saying “Having worn them over the past couple of months I can honestly and truly say that these are the most comfortable and breathable chainsaw pants I have ever worn. I work primarily out of Texas and we deal with very humid and hot temperatures and these pants have been great even in the Texas summer heat. I usually refrain from wearing chainsaw pants until November but not this year. The material is great, comfortable and withstood daily climbing and heat. Thank you very much for allowing me to try these awesome pants out. I have given them rave reviews to all that have asked about them.” Chainsaw protection Clogger's exclusive Arrestex HP chainsaw fabric, 6 layers of light and breathable advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for rotation if a chainsaw strikes. Outer construction and design Outer fabric is constructed of a polyester/lycra blend. 4-way stretch fabric for greater freedom of movement with FlexZone in the seat seam for extra give. Elasticized waist for a snug fit and extra comfort. Lock stitched seams and reinforced stress points. Tree people specific detail 2 huge slanted hip pockets that pull out easily to remove saw dust. 1 welted pocket on thigh ideal for cellphone or accessories - accessible while wearing a harness. Wide belt loops to fit up to a 2 inch belt. Mesh lining for enhanced breathability. Opening at hems to remove debris Weight Lightweight design, just 2.3 lb (Medium). Ships directly from Clogger
DefenderPRO Tough Oil and Water Resistant UL Chainsaw Chaps Calf Wrap By Clogger
WHY WE MADE THIS: Redesigned for tree workers working on the ground, these chaps are designed to be tough enough to withstand everything from blackberry to mud while still being light and comfortable to wear. CERTIFICATION:Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266 Strength re-engineered. DefenderPRO tough chainsaw chaps bring together the latest in technical fabric and design to redefine long lasting and rugged. This version offers 360 calf wrap for extra protection. The outer fabric is constructed from a new grade of specially developed nylon, increasing cut and abrasion resistance. Added to this is an oil and water resistant coating. DefenderPRO chaps are tough. They are practical. They are ready to defend. Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with 360 calf wrap for additional protection. Outer construction and design 1,000 denier, high-tenacity nylon outer covering with oil and water resistance. Soft poly-cotton lining. 2 inch wide belt with quick release buckle. The adjustable waist extends to 49 inches. An additional 18 inch extension belt is available if required. Tree people specific detail 5 rugged polypropylene straps to ensure a comfortable, safe and ultra-secure fit. Tough buckles designed for a long life and to withstand crushing. NEW - Leg buckles are replaceable. Easily replace in the field if damaged or broken. NEW - Each pair comes with a set of 2 replaceable buckles. Weight Lightweight design, just 2 lbs 14 oz (Medium). Options Protection: 360 calf wrap for additional protection Sizes: S-L. Designed and made in Invercargill, New Zealand. Ships directly from Clogger
Elevated Edition Zero Gen2 Light and Cool Men's Arborist UL Chainsaw Pants - Black/Red By Clogger
WHY WE MADE THIS: Developed with Academy Trained to promote the mission of ELEVATING the standard in the Industry. Designed for the climbing arborist who works in hot conditions, these pants are cool and light but still tough with a ripstop outer. CERTIFICATIONS: Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266 SHORT AND TALL VARIATIONS:These specific styles are made to order products which have an additional lead time of 1-2 weeks Clogger and Academy Trained are both dedicated to enhancing lives by ELEVATING the standard of the Industry. The Elevated Edition Zeros were developed by Clogger and Academy Trained to promote this mission. Made in the distinctive black outer fabric with red flash and featuring an embroidered Elevated logo and circular Elevated symbol, the Elevated edition Zeros are a unique way to show your support in Elevating the standard of the Industry through SAFETY TRAINING and INNOVATION. You also get to have a better day at work in one of the world’s leading chainsaw protective pants. 10% of the proceeds will go to the Elevated Scholarship Fund. This Fund will provide training for tree workers who are not in a position to finance training themselves but have demonstrated a desire to elevate their skills and advance in the industry. Academy Trained will be working with other training companies and organizations to ensure these individuals get the proper training to advance their skills. Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for movement if a chainsaw strikes. Outer construction and design Outer fabric is engineered to lower body temperature by dispersing body heat through breathability and the use of Nilit® Breeze yarn - Nilit® is proven to reduce body temperature. 4-way stretch fabric for greater freedom of movement and flexibility with FlexZone in the seat seam for extra give. High-tenacity nylon with a ripstop weave for a 1.5x stronger outer. DWR water resistant coating. Abrasion resistant fabric over the knee, the inside of the calf and ankle areas increasing the durability in these high wear areas. Ultra-high tear strength Dyneema fabric at the right calf to protect against small cuts caused by the chainsaw when hanging off the harness. Elasticized waist for a snug fit and extra comfort. Lock stitched seams and reinforced stress points. Tree people specific detail 2 tough, large cross flow mesh side vents for maximum cooling. 2 zipped hip pockets; 2 zipped thigh pockets individually sewn to be able to remove saw dust with an additional pocket on the left thigh. Lower pockets are all accessible while wearing a harness. Strong, durable zippers with a better seal to reduce the risk of sawdust damage. Special zipper pulls on the pockets to make accessing your pockets easy even when wearing gloves. Boot hooks made from durable plastic construction that has been reversed to prevent snagging on throw lines all while still securely holding pants in place when climbing. Wide belt loops to fit up to a 2 inch belt. Mesh lining for enhanced breathability. Opening at hems to remove debris. High-visibility panels front and rear. Weight Lightweight design, just 2 lbs 3 oz (Medium). Ships directly from Clogger
SwedePro Essential Z-Wrap Chap
Even when you’re in a hurry, safety is still a top priority. Simply slide on our latest product, the Z-Wrap, for comprehensive protection. Engineered to provide 360⁰ protection around the lower leg, the Z-Wrap offers coverage without compromising mobility. The Avertic® Pro+ inner material pulls apart with a chainsaw impact, jamming the chain and stopping the rotor to reduce the severity of injury. With the quick zipper closure, prioritizing safety has never been easier. Even when you’re in a hurry, safety is still a top priority. Simply slide on our latest product, the Z-Wrap, for comprehensive protection. Engineered to provide 360⁰ protection around the lower leg, the Z-Wrap offers coverage without compromising mobility. With the quick zipper closure, prioritizing safety has never been easier. SwedePro Chainsaw Protection: How It Works Avertic® Pro+ Material: When the rotating chain sinks its teeth into your chaps, this material springs into action. Teeth vs. Fabric: As the chainsaw’s teeth make contact, the Avertic® Pro+ material pulls apart, jams the chain, and stops the rotor, giving you precious seconds to react. No Permanent Damage: SwedePro’s apparel won’t permanently damage the chain or the chainsaw. After the encounter, a quick cleaning and unjamming, and your chainsaw is ready for action again. Features Multiple layers of Avertic® Pro+ by Engtex® Additional protective coverage around entire calves Quick and easy zipper and single buckle strap Durable outer shell Machine washable Classified by UL® using ASTM Test Method F1414 in accordance with ASTM Standard F1897 OSHA Approved to Regulation 1910.266 USDA Forestry Service Authorized Size and Fit - All chaps come in four lengths with adjustable waistbands measuring from 30"-42”. Chaps are sized by the outside length of the user’s leg. Measure from the top of the hip down past the top of the work boot. Available lengths are 32”, 36”, 40” and 44”, with the option of custom lengths for an additional fee. The correct length should cover the top of the boot ending between the 2nd and 3rd lace point. All straps should be cinched to a snug fit and any zippers fully engaged. Chaps should not be able to rotate around the leg exposing to injury. WARNING - No one can guarantee that an injury will not occur or will be less severe because an operator wears this protective garment or protective device. It is not a substitute for good safety procedures in chainsaw use. This protective garment is intended, under limited conditions, to assist the wearer in reducing the severity of injury from a running power saw chain that accidentally contacts the saw operator's leg. Even with this garment, severe personal injury can result from contact with the rotating saw chain. This garment contains layers of cut-retardant material designed to reduce the risk of severity of injury to the covered area. Failure to follow the manufacturer's instructions may result in the protective garment or protective device no longer providing the minimum protection required by this specification.
Wildfire Chainsaw Chaps Apron Style USFS Approved NFPA 1977 for Wildland Firefighters By Clogger
Outdated, inflexible, hot and uncomfortable chainsaw protection has been the norm forever when working in the US Wildfire industry. Clogger's Gen 2 Wildfire chainsaw chaps throw all this out the window. A refreshingly modern fit. Light and more importantly breathable. No motion restriction. USFS approved and NFPA 1977 certified. 100% Fire Resistant to the core. Reduced snagging risk. And remarkably tough. In fact you will forget you have them on! Revolutionize your life with the Clogger Gen2 Wildfire Chaps. Chainsaw protection Certified by Underwriters Laboratories (UL) to meet ASTM F 1897-20 Standard Specification for Leg Protection for Chain Saw users. Uses Clogger’s exclusive Arrestex FR chainsaw fabric which is light and breathable with 6 layers of advanced fully FR technical chainsaw fabric that will not melt or burn. Arrestex FR includes ultra strong Vectran cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side of each leg to reduce the risk of injuries caused by chap rotation. Outer construction and design Ultra tough, breathable and flexible Kevlar-based FR outer for extended life. Market leading, 5-strap attachment system for improved safety performance and reduced snagging. Split design for easier movement. All components 100% fire resistant, including outer fabric, chainsaw protective fabric, lining and webbing straps Tough viscose/aramid lining fabric High temp buckle fasteners Wildland fire people specific detail Certified by Underwriters Laboratories (UL) to meet NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting. Approved by USFS in the 2024 Redbook 2 inch wide belt with quick release buckle. Weight Lightweight design, just 2 lbs 3.6 oz (Medium). Ships directly from Clogger
Zero Light and Cool UL Chainsaw Chaps Calf Wrap By Clogger
Looking for the coolest, lightest safest chainsaw chaps on the planet? Get Clogger Zero Chaps. A breath of fresh air in cool chainsaw chap design. Developed to protect not only against chainsaws but to reduce the heat buildup from physical exertion especially in hot environments. Zero chainsaw chaps are lightweight and breathable, adding protection rather than weight and helping you stay cool as the work becomes hot and heavy. Protection is now a breeze. The calf wrap version come with additional chainsaw protection from the back of the knee to the ankle. What people are saying "These chaps are a huge improvement over the regular chaps from the leading manufacturers, they are way cooler & way more comfortable, you'll forget you even have them on!" Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with 360 calf wrap for additional protection. Outer construction and design Tough, breathable, high tenacity nylon outer with DWR to repel water and oil. Soft poly-cotton lining. 2 inch wide belt with quick release buckle. Tree people specific detail 5 rugged polypropylene straps to ensure a comfortable, safe and ultra-secure, fit. Tough buckles designed for long life and to withstand crushing. High-visibility panels. NEW - Leg buckles are replaceable. Easily replace in the field if damaged or broken. NEW - Each pair comes with a set of 2 replaceable buckles. Weight Lightweight design just 2 lbs 5 oz - (Medium). Ships directly from Clogger
FULL WRAP ORANGE CHAPS, SIZE 32
Comfortable protection for your legs while logging or using your chainsaw in full-wrap chaps design, with 8 layers breathable warp knit chainsaw protection.8 layers breathable warp knit chainsaw protectionConforms to ASTM F1897-08 and UL classifiedAdjustable length with top snaps on waist600 Denier Oxford shellMachine washable2 straps for custom fit PRODUCT DETAILS Conforms to ASTM F1897-08 and UL classified 8 layers breathable warp knit chainsaw protection 600 Denier Oxford shell Adjustable length with top snaps on waist 2 straps for custom fit Machine washable
DefenderPRO Gen2 Tough Men’s UL Chainsaw Pants With 360 Calf Wrap By Clogger
WHY WE MADE THIS: Designed for the professional tree workers who work mostly on the ground, this pant offers a tough outer but is still full stretch, light and cool to wear. The All Season Edition features zipped vents so you can adjust to temperature changes. CERTIFICATION: Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266 SHORT AND TALL VARIATIONS:These specific styles are made to order products which have an additional lead time of 1-2 weeks Are you ready to meet Clogger’s toughest chainsaw pants yet? We get it. Your work day can be all over the place. A bit of climbing here, a bit of ground clean up there and throw in some bucket work - all in one day. The DefenderPRO Gen2 is designed for you.The DefenderPRO is arguably our toughest trouser ever. Tough with full flex thanks to the all new ultra tough ripstop Cordura® outer with 4-way stretch. Light at just over 2 lb. Featuring adjustable cooling with Clogger’s zipped vents to help stay cool on warmer days. The Gen2 DefenderPROs include all design techniques and fit that has made Clogger so popular. The 360s offer additional safety features including 360 calf wrap protection and reflective hoops for visibility in low light conditions. Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for movement if a chainsaw strikes. Front with 360 calf wrap for additional protection. Outer construction and design Outer fabric is tough and breathable Cordura® ripstop outer. 4-way stretch fabric for greater freedom of movement with FlexZone in the seat seam for extra give. PFC free DWR outer to repel water and oil. Elasticized waist for a snug fit and extra comfort. Lock stitched seams and reinforced stress points. Tree people specific detail Adjustable cooling using 2 zipped rear vents to help stay cool on warmer days. 2 large zipped hip pockets that pull out to easily remove saw dust. 1 zipped pocket on thigh ideal for cellphone or accessories - accessible while wearing a harness. Strong, durable zippers with a tight seal to reduce the risk of sawdust damage. Special zipper pulls on the pockets to make accessing your pockets easy even when wearing gloves. Dual reflective hoops on both legs, to meet the performance requirements of high visibility standards ASTM107. Wide belt loops to fit up to a 2 inch belt. Mesh lining for enhanced breathability. Opening at hems to remove debris. Weight Lightweight design, just 2.4 lb (Medium). Options Protection: Front with 360 calf wrap. Fit: Men's. Size: XS - 3XL. Leg Length: Short, Standard, Tall. Ships directly from Clogger
Zero Gen2 Light and Cool Men's UL Chainsaw Pants - Hi Vis Orange By Clogger
WHY WE MADE THIS: Designed for the climbing arborist who works in hot conditions, these pants are cool and light but still tough with a ripstop outer and abrasion resistant sections. CERTIFICATION: Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266 FRONT WITH 360 CALF PROTECTION IN SHORT AND TALL LEG VARIANTS:Front with 360 calf protection in short and tall variants are made to order products which have an additional lead time of 1-2 weeks The first generation of the Zero has been a game changer for the industry. The first lightweight, cool chainsaw pants. With Zero, you don’t sweat all day long when you are climbing. The new Zero does the same as his older brother. But better. Like the original, it embraces your movements: you are able to stretch, climb and jump freely. With the Gen2, you get a number of improvements from tougher zips and an elasticized seat seam for extra give through to an ultra tough rear pad to prevent tears from your hanging chainsaw. Of course, Zero's fit and style stays the same. You will look good in the trees… or on the ground! The Hi Vis Orange model take visibility to a new level. Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for movement if a chainsaw strikes. Outer construction and design The outer fabric incorporates COOLMAX® to lower body temperature by dispersing body heat and moisture. High-tenacity high vis orange polyester outer with 4-way stretch fabric for greater freedom of movement and flexibility with FlexZone in the seat seam for extra give. Abrasion resistant fabric over the knee, the inside of the calf and ankle areas increasing the durability in these high wear areas. Ultra-high tear strength UHMWPE fabric at the right calf to protect against small cuts caused by the chainsaw when hanging off the harness. Elasticized waist for a snug fit and extra comfort. Lock stitched seams and reinforced stress points. Tree people specific detail Tough, large cross flow mesh side vents for maximum cooling. 2 zipped hip pockets; 2 zipped thigh pockets individually sewn to be able to remove saw dust with an additional pocket on the left thigh. Lower pockets are all accessible while wearing a harness. Strong, durable zippers with a better seal to reduce the risk of sawdust damage. Special zipper pulls on the pockets to make accessing your pockets easy even when wearing gloves. Boot hooks made from durable plastic construction that has been reversed to prevent snagging on throw lines all while still securely holding pants in place when climbing. Wide belt loops to fit up to a 2 inch belt. Mesh lining for enhanced breathability. Opening at hems to remove debris. Weight Lightweight design, just 2 lbs 3 oz (Medium). Ships directly from Clogger
Ascend Gen2 Year Round Mid Weight Men's Arborist UL Chainsaw Pants By Clogger
Ascends are designed for people who like a specialist chainsaw pant for the cooler months. Cosy and warm when they need to be but with vents and lots of stretch to make work easy on warmer days. Buy Ascends to complement the light and breezy Zeros. CERTIFICATION: Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266 FRONT WITH 360 CALF PROTECTION IN SHORT AND TALL LEG VARIANTS:Front with 360 calf protection in short and tall variants are made to order products which have an additional lead time of 1-2 weeks Ships directly from Clogger
Ropeguard Chainsaw Protective Rope Sleeve By Clogger
Clogger's Ropeguard offers added safeguarding for arborist ropes against inadvertent chainsaw contact. With a universal fit and a length of 38.5 inches, it weighs only 1 pound. The Ropeguard delivers additional safety measures by creating redundancy, shielding your rope from potential chainsaw encounters. Crafted from high-performance chainsaw fabric, the Ropeguard sleeve ensures durability while being effortless to install and utilize. Constructed with a blend of Vectran technical cut-resistant fibers and polypropylene fibers, the materials provide proven chainsaw protection that is both flexible and easy to handle. Here are some features and benefits: Lightweight design at just 1 pound (less than 0.5 kg) Extended 38.5-inch (98cm) length offers enhanced coverage, suitable for basal anchor configurations and lanyard/friction savers on large stems Outer fabric engineered for durability, featuring a 240 GSM Kevlar blend outer and reinforced binding around each end Inner layer crafted from high-strength 330 D Nylon66 with a plain weave, ensuring a smooth surface for easier rope movement Universal fit with a 2 1/2-inch diameter (6 cm) stiffened opening, facilitating easy insertion of common rope sizes through milking the rope, leaving a carabiner on and shaking the rope through, or utilizing a reach tool. Ships directly from Clogger
SwedePro Essential Apron Chap
The Essential Apron Chap embodies classic practicality, featuring an airy, open-back design to provide ventilation. Multiple buckle straps around the leg secure the chap close to the body for function and protection. The Avertic® Pro+ inner material pulls apart with a chainsaw impact, jamming the chain and stopping the rotor to reduce the severity of injury Additional Information The Essential Apron Chap embodies classic practicality, featuring an airy, open-back design to provide ventilation. Multiple buckle straps around the leg secure the chap close to the body for function and protection. SwedePro Chainsaw Protection: How It Works Avertic® Pro+ Material: When the rotating chain sinks its teeth into your chaps, this material springs into action. Teeth vs. Fabric: As the chainsaw’s teeth make contact, the Avertic® Pro+ material pulls apart, jams the chain, and stops the rotor, giving you precious seconds to react. No Permanent Damage: SwedePro’s apparel won’t permanently damage the chain or the chainsaw. After the encounter, a quick cleaning and unjamming, and your chainsaw is ready for action again. Features Multiple layers of Avertic® Pro+ by Engtex® Open back design Simple and strong buckle points Durable outer shell Machine washable Classified by UL® using ASTM Test Method F1414 in accordance with ASTM Standard F1897 OSHA Approved to Regulation 1910.266 USDA Forestry Service Authorized Size and Fit - All chaps come in four lengths with adjustable waistbands measuring from 30"-42”. Chaps are sized by the outside length of the user’s leg. Measure from the top of the hip down past the top of the work boot. Available lengths are 32”, 36”, 40” and 44”, with the option of custom lengths for an additional fee. The correct length should cover the top of the boot ending between the 2nd and 3rd lace point. All straps should be cinched to a snug fit and any zippers fully engaged. Chaps should not be able to rotate around the leg exposing to injury. WARNING - No one can guarantee that an injury will not occur or will be less severe because an operator wears this protective garment or protective device. It is not a substitute for good safety procedures in chainsaw use. This protective garment is intended, under limited conditions, to assist the wearer in reducing the severity of injury from a running power saw chain that accidentally contacts the saw operator's leg. Even with this garment, severe personal injury can result from contact with the rotating saw chain. This garment contains layers of cut-retardant material designed to reduce the risk of severity of injury to the covered area. Failure to follow the manufacturer's instructions may result in the protective garment or protective device no longer providing the minimum protection required by this specification.
SwedePro Professional Z-Wrap Chap
The Professional Z-Wrap Chap is the ultimate choice for working in demanding situations with large, powerful saws. With 360⁰ of protection around the lower leg and a convenient quick zipper closure, this chap ensures maximum protection and performance. The Avertic® Pro+ Lite inner material pulls apart with a chainsaw impact, jamming the chain and stopping the rotor to reduce the severity of injury. We’ve also added two reflective stripes around each leg to increase visibility and a zippered pocket for keeping tools and personal items secure and within reach Additional Information The Professional Z-Wrap Chap is the ultimate choice for working in demanding situations with large, powerful saws. With 360⁰ of protection around the lower leg and a convenient quick zipper closure, this chap ensures maximum protection and performance. We’ve added two reflective stripes around each leg to increase visibility and a zippered pocket for keeping tools and personal items secure and within reach. SwedePro Chainsaw Protection: How It Works Avertic® Pro+ Lite Material: When the rotating chain sinks its teeth into your chaps, this material springs into action. Teeth vs. Fabric: As the chainsaw’s teeth make contact, the Avertic® Pro+ Lite material pulls apart, jams the chain, and stops the rotor, giving you precious seconds to react. No Permanent Damage: SwedePro’s apparel won’t permanently damage the chain or the chainsaw. After the encounter, a quick cleaning and unjamming, and your chainsaw is ready for action again. Features Multiple layers of Avertic® Pro+ Lite by Engtex® Additional protective coverage around entire calves Quick and easy zipper and single buckle strap Durable outer shell Zipper pocket for accessible storage Reflective stripes around calves Machine washable Classified by UL® using ASTM Test Method F1414 in accordance with ASTM Standard F1897 OSHA Approved to Regulation 1910.266 USDA Forestry Service Authorized Size and Fit – All chaps come in four lengths with adjustable waistbands measuring from 30″-42”. Chaps are sized by the outside length of the user’s leg. Measure from the top of the hip down past the top of the work boot. Available lengths are 32”, 36”, 40” and 44”, with the option of custom lengths for an additional fee. The correct length should cover the top of the boot ending between the 2nd and 3rd lace point. All straps should be cinched to a snug fit and any zippers fully engaged. Chaps should not be able to rotate around the leg exposing to injury.
SwedePro Professional Wrap Chap
When working on demanding job sites with powerful saws, choosing the right level of protection is critical. The Professional Wrap Chaps are specifically designed with extra coverage around the back of the lower leg, giving you 360⁰ of protection. The Avertic® Pro+ Lite inner material pulls apart with a chainsaw impact, jamming the chain and stopping the rotor to reduce the severity of injury. We’ve also added two reflective stripes around each leg to increase visibility and a zippered pocket for keeping tools and personal items secure and within reach. Additional Information When working on demanding job sites with powerful saws, choosing the right level of protection is critical. The Professional Wrap Chaps are specifically designed with extra coverage around the back of the lower leg, giving you 360⁰ of protection. We added two reflective stripes around each leg to increase visibility and a zippered pocket for keeping tools and personal items secure and within reach. SwedePro Chainsaw Protection: How It Works Avertic® Pro+ Lite Material: When the rotating chain sinks its teeth into your chaps, this material springs into action. Teeth vs. Fabric: As the chainsaw’s teeth make contact, the Avertic® Pro+ Lite material pulls apart, jams the chain, and stops the rotor, giving you precious seconds to react. No Permanent Damage: SwedePro’s apparel won’t permanently damage the chain or the chainsaw. After the encounter, a quick cleaning and unjamming, and your chainsaw is ready for action again. Features Multiple layers of Avertic® Pro+ Lite by Engtex® Additional protective coverage around entire calves Simple and strong buckle points Durable outer shell Zipper pocket for accessible storage Reflective stripes around calves Machine washable Classified by UL® using ASTM Test Method F1414 in accordance with ASTM Standard F1897 OSHA Approved to Regulation 1910.266 USDA Forestry Service Authorized Size and Fit - All chaps come in four lengths with adjustable waistbands measuring from 30"-42”. Chaps are sized by the outside length of the user’s leg. Measure from the top of the hip down past the top of the work boot. Available lengths are 32”, 36”, 40” and 44”, with the option of custom lengths for an additional fee. The correct length should cover the top of the boot ending between the 2nd and 3rd lace point. All straps should be cinched to a snug fit and any zippers fully engaged. Chaps should not be able to rotate around the leg exposing to injury.
SwedePro Professional Apron Chap
When working in tricky situations with large, powerful saws, the Professional Chap is the choice to make. The open-back design of the Apron Chap is ideal for hot temperatures. The Avertic® Pro+ Lite inner material pulls apart with a chainsaw impact, jamming the chain and stopping the rotor to reduce the severity of injury. The Professional line adds two reflective stripes around the leg to increase visibility no matter the work site. They are rugged and comfortable, featuring a zippered pocket for keeping tools and personal items secure and within reach. Additional Information When working in tricky situations with large, powerful saws, the Professional Chap is the choice to make. The open-back design of the Apron Chap is ideal for hot temperatures. The Professional line adds two reflective stripes around the leg to increase visibility no matter the work site. They are rugged and comfortable, featuring a zippered pocket for keeping tools and personal items secure and within reach. Avertic® Pro+ Lite Material: When the rotating chain sinks its teeth into your chaps, this material springs into action. Teeth vs. Fabric: As the chainsaw’s teeth make contact, the Avertic® Pro+ Lite material pulls apart, jams the chain, and stops the rotor, giving you precious seconds to react. No Permanent Damage: SwedePro’s apparel won’t permanently damage the chain or the chainsaw. After the encounter, a quick cleaning and unjamming, and your chainsaw is ready for action again. Features Multiple layers of Avertic® Pro+ Lite by Engtex® Open back design Simple and strong buckle points Durable outer shell Zipper pocket for accessible storage Reflective stripes around calves Machine washable Classified by UL® using ASTM Test Method F1414 in accordance with ASTM Standard F1897 OSHA Approved to Regulation 1910.266 USDA Forestry Service Authorized Size and Fit – All chaps come in four lengths with adjustable waistbands measuring from 30″-42”. Chaps are sized by the outside length of the user’s leg. Measure from the top of the hip down past the top of the work boot. Available lengths are 32”, 36”, 40” and 44”, with the option of custom lengths for an additional fee. The correct length should cover the top of the boot ending between the 2nd and 3rd lace point. All straps should be cinched to a snug fit and any zippers fully engaged. Chaps should not be able to rotate around the leg exposing to injury.
Arcmax Gen3 Arc Rated Fire Resistant UL Chainsaw Chaps Apron Style By Clogger
Arc-flashes or accidents involving fire can cause horrific burns or even be fatal. To protect you against these hazards, Clogger developed the Arcmax line of arc-rated and fully fire resistant chainsaw protective clothing with all components inherently FR including the chainsaw fabric. Clogger’s Arcmax Gen3 range features the new ultra tough FR outer which is 60% tougher for an extended life and has a 11 cal arc rating for more protection. Arcmax just went next level. Chainsaw protection Uses Clogger’s exclusive Arrestex FR chainsaw fabric which is light and breathable with 6 layers of advanced fully FR technical chainsaw fabric that will not melt or burn. Arrestex FR includes ultra strong Vectran cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage. Outer construction and design Outer fabric rated to 11 cal/cm2 according to ASTM F1959 for arc resistance and passed EN ISO 15025: 2000 for fire resistance. All components fire resistant, including outer fabric, chainsaw protective fabric and lining. Tough FR outer with a 60% higher tear strength for extended life. Tree people specific detail Complies with NFPA Code 70E 130.7(11) and ENA NENS 09-2014 for arc protection. 2 inch FR reflective tape at the lower leg complies with the performance requirements of high visibility standards: ANSI 107:2015; AS/NZS 1906.4:2010. 2 inch wide belt with quick release buckle. The adjustable waist extends to 49 inches. An additional 18 inch extension belt is available if required. Weight Lightweight design, just 2 lbs 7 oz (Medium). Ships directly from Clogger
Spider Women's Climbing and Work Pants (Not Chainsaw Protective) By Clogger
WHY WE MADE THIS: Designed for competitive tree climbers, these pants are cool to wear, stretchy, but also tough with abrasion resistant lower legs and padded knees and shins. SAFETY MESSAGE:These are not chainsaw protective MADE TO ORDER:Short, Tall and 3XL are made to order products and have an additional lead time of 1-2 weeks. Taking inspiration from those that climb. Those that go further. Those that explore. Spider is a new breed of climbing trousers for professional arborists and rope access pros. With 360-degree stretch, advanced fabric strength and Nilit® Breeze cooling capabilities…you can go in any direction and set your own limits. Then go beyond them. Outer construction and design Outer fabric, engineered to lower body temperature by dispersing body heat through breathability and the use of Nilit® Breeze Yarn - Nilit® is proven to reduce body temperature. 4-way stretch fabric for greater freedom of movement and flexibility with FlexZone in the seat seam for extra give. Abrasion resistant fabric over the knee and the inside of the ankle areas increasing the durability in these high wear areas. Elasticized waist for a snug fit and extra comfort. Lock stitched seams and reinforced stress points. Padded knee and shin. Tree people specific detail Tough, large cross flow mesh side vents for maximum cooling. 2 zipped hip pockets; 2 zipped thigh pockets individually sewn to be able to remove saw dust with an additional pocket on the left thigh. Lower pockets are all accessible while wearing a harness. Strong, durable zippers with a better seal. Special zipper pulls on the pockets to make accessing your pockets easy even when wearing gloves. Boot hooks made from durable plastic construction that has been reversed to prevent snagging on throw lines all while still securely holding pants in place when climbing. Wide belt loops to fit up to a 2 inch belt. Opening at hems to remove debris. High-strength gusseted crotch for extra mobility. Weight Lightweight design, less than 0.6kg/1lb, 3oz (Medium). Options Color: Contrast - Grey with orange panels, or Grey. Fit: Men's or Women's Size: XS - 3XL. Leg Length: Short, Standard, Tall. Ships directly from Clogger
Spider Men's Climbing and Work Pants (Not Chainsaw Protective) By Clogger
Arcmax Gen3 Arc Rated Fire Resistant Premium 360 Wrap Women's UL Chainsaw Pants Now With Stretch By Clogger
WHY WE MADE THIS: Designed for tree workers facing a risk of fire or arc flash, these trousers finally give you true protection with all parts fully fire resistant including the chainsaw protection material CERTIFICATION:Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266 SHORT AND TALL VARIANTS:These specific styles are made to order products which have an additional lead time of 1-2 weeks Arc-flashes or accidents involving fire can cause horrific burns or even be fatal. To protect you against these hazards, Clogger developed the Arcmax line of arc-rated and fully fire resistant chainsaw protective clothing with all components inherently FR including the chainsaw fabric. Clogger’s Arcmax Gen3 range features the new ultra tough StretchFR outer which gives you 120% 4-way stretch making movement easier. The Gen3’s are also 60% tougher for an extended life and now have a 11 cal arc rating for more protection. Arcmax just went next level. The Premium model offers the addition of abrasion resistant fabric over the knee to extend the life of the product and a full 360 calf wrap complying with Canada's Category A coverage requirements. WHAT PEOPLE ARE SAYING “Wore them every day throughout this winter and no rips or tears. Very easy to climb with, virtually no restrictions with flexibility.” “I was climbing in the stretch fabric pants yesterday in Douglas fir, and they held up very well. Saw was bumping against my legs and grabbing fabric a bit and still no tears.” Chainsaw protection Uses Clogger’s exclusive Arrestex FR chainsaw fabric which is light and breathable with 6 layers of advanced fully FR technical chainsaw fabric that will not melt or burn. Arrestex FR includes ultra strong Vectran cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for movement if a chainsaw strikes. Front with 360 calf wrap for additional protection. Outer construction and design Outer fabric rated to 11 cal/cm2 according to ASTM F1959 for arc resistance and passed EN ISO 15025: 2000 for fire resistance. All components fire resistant, including outer fabric, chainsaw protective fabric and lining. 4-way 120% stretch FR outer for ease of movement with 60% increase in tear strength for extended life. FlexZone in the seat seam for extra give. Abrasion resistant material over knee Elasticized waist increases comfort and fit Lock stitched seams and stress points reinforced Tree people specific detail 2 large zipped hip pockets that pull out to easily remove saw dust. 1 zipped pocket on the thigh ideal for cellphone or accessories - accessible while wearing a harness. Strong, durable zippers with a better seal to reduce the risk of sawdust damage. Complies with NFPA Code 70E 130.7(11) and ENA NENS 09-2014 for arc protection. 2 inch wide FR reflective tape at the lower leg complies with the performance requirements of high visibility standards: ANSI 107:2015; AS/NZS 1906.4:2010. Belt loops to fit up to a 2 inch belt. Opening at hems to remove debris. Weight Lightweight design, just under 2 lbs 11 oz (Medium). Options Protection: Front with 360 calf wrap. Fit: Men's or Women's Size: XS - 3XL. Leg Length: Short, Standard, Tall. Ships directly from Clogger
Arcmax Gen3 Arc Rated Fire Resistant Premium 360 Wrap Men's UL Chainsaw Pants Now With Stretch By Clogger
WHY WE MADE THIS: Designed for tree workers facing a risk of fire or arc flash, these trousers finally give you true protection with all parts fully fire resistant including the chainsaw protection material CERTIFICATION:Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266 SHORT AND TALL VARIANTS:These specific styles are made to order products which have an additional lead time of 1-2 weeks Arc-flashes or accidents involving fire can cause horrific burns or even be fatal. To protect you against these hazards, Clogger developed the Arcmax line of arc-rated and fully fire resistant chainsaw protective clothing with all components inherently FR including the chainsaw fabric. Clogger’s Arcmax Gen3 range features the new ultra tough StretchFR outer which gives you 120% 4-way stretch making movement easier. The Gen3’s are also 60% tougher for an extended life and now have a 11 cal arc rating for more protection. Arcmax just went next level. The Premium model offers the addition of abrasion resistant fabric over the knee to extend the life of the product and a full 360 calf wrap complying with Canada's Category A coverage requirements. WHAT PEOPLE ARE SAYING “Wore them every day throughout this winter and no rips or tears. Very easy to climb with, virtually no restrictions with flexibility.” “I was climbing in the stretch fabric pants yesterday in Douglas fir, and they held up very well. Saw was bumping against my legs and grabbing fabric a bit and still no tears.” Chainsaw protection Uses Clogger’s exclusive Arrestex FR chainsaw fabric which is light and breathable with 6 layers of advanced fully FR technical chainsaw fabric that will not melt or burn. Arrestex FR includes ultra strong Vectran cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for movement if a chainsaw strikes. Front with 360 calf wrap for additional protection. Outer construction and design Outer fabric rated to 11 cal/cm2 according to ASTM F1959 for arc resistance and passed EN ISO 15025: 2000 for fire resistance. All components fire resistant, including outer fabric, chainsaw protective fabric and lining. 4-way 120% stretch FR outer for ease of movement with 60% increase in tear strength for extended life. FlexZone in the seat seam for extra give. Abrasion resistant material over knee Elasticized waist increases comfort and fit Lock stitched seams and stress points reinforced Tree people specific detail 2 large zipped hip pockets that pull out to easily remove saw dust. 1 zipped pocket on the thigh ideal for cellphone or accessories - accessible while wearing a harness. Strong, durable zippers with a better seal to reduce the risk of sawdust damage. Complies with NFPA Code 70E 130.7(11) and ENA NENS 09-2014 for arc protection. 2 inch wide FR reflective tape at the lower leg complies with the performance requirements of high visibility standards: ANSI 107:2015; AS/NZS 1906.4:2010. Belt loops to fit up to a 2 inch belt. Opening at hems to remove debris. Weight Lightweight design, just under 2 lbs 11 oz (Medium). Options Protection: Front with 360 calf wrap. Fit: Men's or Women's Size: XS - 3XL. Leg Length: Short, Standard, Tall. ships directly from manufacture
Denim Women's UL Chainsaw Pants By Clogger
Arcmax Gen3 Arc Rated Fire Resistant Women's UL Chainsaw Pants Now with Stretch By Clogger
CERTIFICATION:Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266 WHY WE MADE THIS: Designed for tree workers facing a risk of fire or arc flash, these trousers finally give you true protection with all parts fully fire resistant including the chainsaw protection material. SHORT AND TALL VARIANTS:These specific styles are made to order products which have an additional lead time of 1-2 weeks Arc-flashes or accidents involving fire can cause horrific burns or even be fatal. To protect you against these hazards, Clogger developed the Arcmax line of arc-rated and fully fire resistant chainsaw protective clothing with all components inherently FR including the chainsaw fabric. Clogger’s Arcmax Gen3 range features the new ultra tough StretchFR outer which gives you 120% 4-way stretch making movement easier. The Gen3’s are also 60% tougher for an extended life and now have a 11 cal arc rating for more protection. Arcmax just went next level. WHAT PEOPLE ARE SAYING “Wore them every day throughout this winter and no rips or tears. Very easy to climb with, virtually no restrictions with flexibility.” “I was climbing in the stretch fabric pants yesterday in Douglas fir, and they held up very well. Saw was bumping against my legs and grabbing fabric a bit and still no tears.” Chainsaw protection Uses Clogger’s exclusive Arrestex FR chainsaw fabric which is light and breathable with 6 layers of advanced fully FR technical chainsaw fabric that will not melt or burn. Arrestex FR includes ultra strong Vectran cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for movement if a chainsaw strikes. Outer construction and design Outer fabric rated to 11 cal/cm2 according to ASTM F1959 for arc resistance and passed EN ISO 15025: 2000 for fire resistance. All components fire resistant, including outer fabric, chainsaw protective fabric and lining. 4-way 120% stretch FR outer for ease of movement with 60% increase in tear strength for extended life. FlexZone in the seat seam for extra give. Elasticized waist increases comfort and fit. Lock stitched seams and stress points reinforced. Tree people specific detail 2 large zipped hip pockets that pull out to easily remove saw dust. 1 zipped pocket on the thigh ideal for cellphone or accessories - accessible while wearing a harness. Strong, durable zippers with a better seal to reduce the risk of sawdust damage. Complies with NFPA Code 70E 130.7(11) and ENA NENS 09-2014 for arc protection. 2 inch wide FR reflective tape at the lower leg complies with the performance requirements of high visibility standards: ANSI 107:2015; AS/NZS 1906.4:2010. Wide belt loops to fit up to a 2 inch belt. Opening at hems to remove debris. Weight Lightweight design, just under 2 lbs 7 oz (Medium). Options Protection: Front only protection. Fit: Men's or Women's Size: XS - 3XL. Leg Length: Short, Standard, Tall. Ships directly from Clogger
Arcmax Gen3 Arc Rated Fire Resistant Men's UL Chainsaw Pants Now with Stretch By Clogger
Wildfire Fire Resistant Women's UL Chainsaw Pants with Stretch For Wildland Firefighters By Clogger
CERTIFICATION:Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266 WHY WE MADE THIS: Designed for wildland fire crews working in the heat, Wildfire chainsaw pants are designed to be easier to work in with 4 way stretch and a tough FR outer. Wildland fire fighters used to have to make do with outdated, heavy chainsaw protection. Wildfire from Clogger changes that. A 120% 4 way stretch FR outer with maximum flex for easy movement. Remarkably tough. Fire resistant to the core with every component fully FR including our proprietary Arrestex FR chainsaw fabric. The future of chainsaw protection for Wildland fire crews is here. Chainsaw protection Uses Clogger’s exclusive Arrestex FR chainsaw fabric which is light and breathable with 6 layers of advanced fully FR technical chainsaw fabric that will not melt or burn. Arrestex FR includes ultra strong Vectran cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for movement if a chainsaw strikes. Outer construction and design Outer fabric rated to 11 cal/cm2 according to ASTM F1959 for arc resistance and passed EN ISO 15025: 2000 for fire resistance. 4-way 120% stretch FR outer for ease of movement with 60% increase in tear strength for extended life. All components fire resistant, including outer fabric, chainsaw protective fabric and lining. FlexZone in the seat seam for extra give. Elasticized waist for a snug fit and extra comfort. Lock stitched seams and stress points reinforced. Tree people specific detail Certified by Underwriters Laboratories (UL) to meet NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting. 2 zipped hip pockets and a cargo style pocket on the left thigh for ease of access. Strong, durable zippers with a better seal to reduce the risk of sawdust damage. Heavy duty metal studs provide extra strength when using suspenders. Extra wide belt loops to fit up to a 2 6/16 inch belt. Opening at hems to remove debris. High-back keeps you warm on winter days. Weight Lightweight design, just under 2 lbs 8 oz (Medium). Options Protection: Front only. Fit: Men's or Women's. Size: XS - 3XL. Leg Length: Standard, Short, Tall. Ships directly from Clogger
Wildfire Fire Resistant Men's UL Chainsaw Pants with Stretch For Wildland Firefighters By Clogger
Zero Gen2 Light and Cool Women's UL Chainsaw Pants - Hi Vis Orange By Clogger
TreeCREW UL Women’s Chainsaw Pants By Clogger
Women's Zero Gen2 Chainsaw Trousers By Clogger
