Products

COURANT MILLO ATTACHMENT BRIDGE FOR KOALA HARNASSES.

Attachment bridge 9.5 mm diameter. Bridge made from polyester. The design of its sheathing gives it good resistance to abrasion.

$21.07

View product

COURANT PHOENIX 10MM 0.70M HITCH CORD

The Phoenix is available in 8mm or 10mm diameter as a lanyard with 2 stitched eyes from 65cm up to 110cm, and for different applications we also have the Phoenix available in 100 & 200m rope boxes. At the start of 2020 we replaced the traditional heat shrink tube with a molded polymer end protector as a finishing touch.

$34.80

COURANT PHOENIX 10MM 0.75M HITCH CORD

The Phoenix has been developed for tying different kinds of hitches and works as the perfect brake on arborist climbing ropes. The sheath of this cord is manufactured from the latest generation aramid fibres which are highly resistant to heat, wear and UV radiation. The Phoenix is available in 8mm or 10mm diameter as a lanyard with 2 stitched eyes from 65cm up to 110cm, and for different applications we also have the Phoenix available in 100 & 200m rope boxes. At the start of 2020 we replaced the traditional heat shrink tube with a molded polymer end protector as a finishing touch.

$35.20

COURANT PHOENIX 8 MM 0.75M HITCH CORD

The Phoenix has been developed for tying different kinds of hitches and works as the perfect brake on arborist climbing ropes. The sheath of this cord is manufactured from the latest generation aramid fibres which are highly resistant to heat, wear and UV radiation. The Phoenix is available in 8mm or 10mm diameter as a lanyard with 2 stitched eyes from 65cm up to 110cm, and for different applications we also have the Phoenix available in 100 & 200m rope boxes. At the start of 2020 we replaced the traditional heat shrink tube with a molded polymer end protector as a finishing touch.

$31.80

COURANT PHOENIX 8MM 0.70M HITCH CORD

The Phoenix has been developed for tying different kinds of hitches and works as the perfect brake on arborist climbing ropes. The sheath of this cord is manufactured from the latest generation aramid fibres which are highly resistant to heat, wear and UV radiation. The Phoenix is available in 8mm or 10mm diameter as a lanyard with 2 stitched eyes from 65cm up to 110cm, and for different applications we also have the Phoenix available in 100 & 200m rope boxes. At the start of 2020 we replaced the traditional heat shrink tube with a molded polymer end protector as a finishing touch.

$31.50

COURANT REBEL 11 MM PURPLE BOX 60M

Splicing is build to order, and can take up to two weeks currently. Sharing the same construction with our popular Squir rope, the Rebel has a smaller diameter and therefore it is the perfect rope for fast access into the trees. Its proven durability, low stretch and long-lasting flexibility will ensure high efficiency climb after climb. EN 1891-A certification makes it fully compatible with all modern mechanical devices on the market.

$239.90

COURANT REBEL 11 MM YELLOW BOX 60M

Courant Rebel Yellow - Developed with durability & efficiency in mind the special hybrid construction makes the Rebel a great choice for any rope rescue professional. Available in multiple colors for good rope management during complex rescue scenarios. EN 1891-A certification for the best compatibility with all modern mechanical devices on the market. Sharing the same construction with our popular Squir rope, the Rebel has a smaller diameter and therefore it is the perfect rope for fast access into the trees. Its proven durability, low stretch and long lasting flexibility will ensure high efficiency climb after climb.

$239.90

COURANT SQUIR 2.0 11.5 MM RED BOX 60M

Designed especially for SRT and/or use as an access line. Its low stretch (less than 2% elongation) ensures that the bounce effect is kept to a minimum when ascending the tree. The rope is heat treated in the factory for greater stability, and the sheath protects against wear from sharp toothed cam ascenders. The Squir retains its roundness while descending.

$249.50

COURANT SQUIR 2.0 11.5 MM YELLOW BOX 60M

Courant Squir 2.0 - Yellow - The Squir was designed specifically for SRS/SRT and/or as an access line. Courant re-developed their low stretch 32-strand 11.5mm diameter Squir rope to be more durable while maintaining a super flexible sheath. Designed for SRS/SRT. Low stretch ensures that the bounce effect is kept to a minimum when ascending the tree. Heat treated in the factory for greater stability, and the sheath protects against wear from sharp toothed cam ascenders. Not spliceable per Manufacturer.

$249.50

Courant Stileo Wire Core Lanyard (Without hardware)

This 12mm diameter adjustable wire core lanyard is especially developed for tree removal operations. The robust 16-strand polyester sheath (same construction as the Kanopa) gives the Stileo a comfortable grip, and the special 6mm stainless steel wire core gives it its remarkable flexibility. The direction of use is reversible to ensure even wear, and if necessary the lanyard can be fully replaced thanks to the easy removable metal adjuster. Available in 3 lengths with different hardware options.

From $195.40

View product

Courant Stileo Wire Core Lanyard Kit

This 12mm diameter adjustable wire core lanyard is especially developed for tree removal operations. The robust 16-strand polyester sheath (same construction as the Kanopa) gives the Stileo a comfortable grip, and the special 6mm stainless steel wire core gives it its remarkable flexibility. kit includes Stileo steel core lanyard with swivel snap on the end and the rope grab/adjuster. Another carabiner is needed to clip the lanyard to D ring.

From $252.99

View product

COURANT SYNCHRO FRICTION SAVER : 0.9M

Manufactured with a rigid and wide strap to avoid twisting and facilitate easy recovery. The rings are forged in an aluminium alloy which provides better resistance to abrasion and impact. The direction of the strap can be identified from the ground as a result of colour coded ends. Available in 3 lengths.

$69.60

View product

Courant TORSE KOALA (Top Harness)

The new chest harness is manufactured from perforated foam and soft fabrics which make it very comfortable and highly breathable. It helps to redistribute the weight of heavy tools and increase comfort while climbing. The different loops facilitate the attachment of equipment, accessories or your SRT climbing system. Three karabiners attach the chest to the Koala harness and four adjustment points will give you an optimum fit. The Koala chest is also compatible with other climbing harnesses currently on the market.

$135.99

D-CLASSIC 3000 SCREW

Easy-to-handle aluminium carabiner with keylock closure mechanism. A power pack among the aluminium carabiners. Features Excellent weight to breaking load ratio (30 kN!) Keylock closure mechanism for optimum handling when clipping and unclipping Available as either screwgate or Triple Lock model Technical Information Width: 65 mm Length: 110 mm Gate opening: 20 mm Fmax. major axis: 30 kN Fmax. minor axis : 8 kN Fmax. open : 10 kN Certification : EN 362 Material : Aluminium Closure : Screw

$20.95

D-CLASSIC 3000 TRIPLE

Easy-to-handle aluminium carabiner with keylock closure mechanism. A power pack among the aluminium carabiners. Features Excellent weight to breaking load ratio (30 kN!) Keylock closure mechanism for optimum handling when clipping and unclipping Available as either screwgate or Triple Lock model Technical Information Width: 65 mm Length: 110 mm Gate opening: 20 mm Fmax. major axis: 30 kN Fmax. minor axis : 8 kN Fmax. open : 10 kN Certification : EN 362 Material : Aluminium Closure : Triple

$28.95

Dawson Safety Glasses - Clear

Featuring a full-frame design with a 9-base frame for expanded peripheral coverage, these safety glasses offer optimal protection for any environment. Choose from a range of lens options to ensure the perfect level of protection in varying light conditions. All Edge Eyewear lenses boast the ability to block 99.9% of UVA, UVB, and UVC rays, safeguarding your eyes against harmful radiation. Clear lenses are the timeless choice for safety, providing pristine clarity that's ideal for indoor and low-light conditions. With an impressive 85% light transmission, they ensure excellent visibility and comfort in a variety of settings.

$24.99

Dawson Safety Glasses - Red Mirror

Featuring a full-frame design with a 9-base frame for expanded peripheral coverage, these safety glasses offer optimal protection for any environment. Choose from a range of lens options to ensure the perfect level of protection in varying light conditions. All Edge Eyewear lenses boast the ability to block 99.9% of UVA, UVB, and UVC rays, safeguarding your eyes against harmful radiation. Clear lenses are the timeless choice for safety, providing pristine clarity that's ideal for indoor and low-light conditions. With an impressive 85% light transmission, they ensure excellent visibility and comfort in a variety of settings.

$19.99

Dawson Safety Glasses - Smoke

Featuring a full-frame design with a 9-base frame for expanded peripheral coverage, these safety glasses offer optimal protection for any environment. Choose from a range of lens options to ensure the perfect level of protection in varying light conditions. All Edge Eyewear lenses boast the ability to block 99.9% of UVA, UVB, and UVC rays, safeguarding your eyes against harmful radiation. Clear lenses are the timeless choice for safety, providing pristine clarity that's ideal for indoor and low-light conditions. With an impressive 85% light transmission, they ensure excellent visibility and comfort in a variety of settings.

$24.99

Dead-Eye Sling - 1/2" Tenex Tec

Please allow up to one week for splicing to be completed. Material: Constructed from 1/2" Diameter Tenex TEC Working Load: 10:1 Working Load Ratio*: 1,114 lb. Eye Length: 18" *Working Load Limit (WLL) calculated with a 10:1 design factor and sling configured in choker position. Eye slings serve as versatile rigging tethers, requiring proficiency in knot-tying. Our expertly hand-spliced eye slings feature an oversized 18" eye, perfect for girth-hitching onto the Port-A-Wrap, block, or Fiori Ring. Secure the sling tail with a cow hitch or timber hitch. Samson's Tenex TEC material outperforms double-braid rope of similar dimensions, offering superior strength-to-weight ratio, exceptional durability, and a reliable grip on the tree.

From $47.40

View product

Dead-Eye Sling 3/4" Tenex TEC

Working Load: 10:1 Working Load Ratio*: 2,108 lb. Eye Length: 18" *Working Load Limit (WLL) calculated with a 10:1 design factor and sling configured in choker position. Our tree rigging sling features an extra-large 18" eye, expertly crafted from 3/4" Samson Tenex TEC, providing exceptional strength and durability. With a Working Load Limit (WWL) of 2,108 lb in choker configuration, this sling offers reliable performance in demanding rigging applications. Professionally hand-spliced, our eye slings are versatile rigging tethers suitable for various tasks. The oversized eye allows for easy girth-hitching onto the Port-A-Wrap, block, or Fiori Ring. Secure the sling tail with a cow hitch or timber hitch for added stability during operations. Samson's Tenex TEC material outperforms double-braid rope of similar dimensions, offering superior strength-to-weight ratio, outstanding durability, and a secure grip on the tree.

From $56.00

View product

DefenderPRO Gen2 Tough Men’s UL Chainsaw Pants With 360 Calf Wrap By Clogger

WHY WE MADE THIS: Designed for the professional tree workers who work mostly on the ground, this pant offers a tough outer but is still full stretch, light and cool to wear. The All Season Edition features zipped vents so you can adjust to temperature changes. CERTIFICATION: Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266 SHORT AND TALL VARIATIONS:These specific styles are made to order products which have an additional lead time of 1-2 weeks Are you ready to meet Clogger’s toughest chainsaw pants yet? We get it. Your work day can be all over the place. A bit of climbing here, a bit of ground clean up there and throw in some bucket work - all in one day. The DefenderPRO Gen2 is designed for you.The DefenderPRO is arguably our toughest trouser ever. Tough with full flex thanks to the all new ultra tough ripstop Cordura® outer with 4-way stretch. Light at just over 2 lb. Featuring adjustable cooling with Clogger’s zipped vents to help stay cool on warmer days. The Gen2 DefenderPROs include all design techniques and fit that has made Clogger so popular. The 360s offer additional safety features including 360 calf wrap protection and reflective hoops for visibility in low light conditions. Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for movement if a chainsaw strikes. Front with 360 calf wrap for additional protection. Outer construction and design Outer fabric is tough and breathable Cordura® ripstop outer. 4-way stretch fabric for greater freedom of movement with FlexZone in the seat seam for extra give. PFC free DWR outer to repel water and oil. Elasticized waist for a snug fit and extra comfort. Lock stitched seams and reinforced stress points. Tree people specific detail Adjustable cooling using 2 zipped rear vents to help stay cool on warmer days. 2 large zipped hip pockets that pull out to easily remove saw dust. 1 zipped pocket on thigh ideal for cellphone or accessories - accessible while wearing a harness. Strong, durable zippers with a tight seal to reduce the risk of sawdust damage. Special zipper pulls on the pockets to make accessing your pockets easy even when wearing gloves. Dual reflective hoops on both legs, to meet the performance requirements of high visibility standards ASTM107. Wide belt loops to fit up to a 2 inch belt. Mesh lining for enhanced breathability. Opening at hems to remove debris. Weight Lightweight design, just 2.4 lb (Medium). Options Protection: Front with 360 calf wrap. Fit: Men's. Size: XS - 3XL. Leg Length: Short, Standard, Tall. Ships directly from Clogger Fits Top of Hip Range Size CM IN 2XS 72-77 28-30 XS 78-83 30.5-32.5 S 84-89 33-35 M 90-95 35.5-37.5 L 96-101 38-40 XL 102-107 40-42 2XL 108-113 43-45 3XL 114-119 45-47 Standard - Fits Person With Inleg Length Size CM IN 2XS 77.5 30.5 XS 78.5 31 S 79.5 31 M 80.5 32 L 81.5 32 XL 82.5 32.5 2XL 82.5 32.5 3XL 82.5 32.5 Short- Fits Person With Inleg Length Size CM IN 2XS 71.5 28 XS 72.5 28.5 S 73.5 29 M 74.5 29 L 75.5 30 XL 76.5 30 2XL 76.5 30 3XL 76.5 30 Tall - Fits Person With Inleg Length Size CM IN 2XS 83.5 33 XS 84.5 33 S 85.5 33.5 M 86.5 34 L 87.5 34.5 XL 88.5 35 2XL 88.5 35 3XL 88.5 35 Approx Jeans Equivalent Waist Size Size CM IN 2XS 69 27 XS 75 30 S 81 32 M 87 35 L 93 37 XL 99 39 2XL 105 42 3XL 111 44

$375.00

View product

DefenderPRO Gen2 Tough UL Men's Chainsaw Pants By Clogger

Clogger’s toughest chainsaw pants are now even cooler. When your day involves a little of everything or beating through thickets of thorns, then the DefenderPRO chainsaw pant is for you. Tough with full flex thanks to the ripstop Cordura® outer with 4-way stretch. And when the heat is up the new huge cross flow vents will keep you cool.  Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for rotation if a chainsaw strikes. Outer construction and design Outer fabric is tough and breathable Cordura® ripstop outer. 4-way stretch fabric for greater freedom of movement with FlexZone in the seat seam for extra give. PFC free DWR outer to repel water and oil. Elasticized waist for a snug fit and extra comfort. Lock stitched seams and reinforced stress points. Tree people specific detail NEW - 2 huge cross flow mesh side vents for maximum cooling. NEW - UL label located at rear for easy visibility. 1 zipped pocket on thigh ideal for cellphone or accessories - accessible while wearing a harness. Strong, durable zippers with a tight seal to reduce the risk of sawdust damage. Special zipper pulls on the pockets to make accessing your pockets easy even when wearing gloves. Wide belt loops to fit up to a 2 inch belt. Mesh lining for enhanced breathability. Opening at hems to remove debris. Weight Lightweight design, just 2.2 lb (Medium). Options Protection: Front only. Fit: Men's or Women's Size: 2XS - 3XL. Leg Length: Short, Standard, Tall. Note 1: IMPORTANT These pants across Short, Standard, and Tall all include an additional 5cms/2 inches of length to allow for lift from kneeling and knee flex/bending.Note 2: These garments are designed to be 'mid-rise', i.e. the top of the waistband will sit on the top of the hips, not as high as the natural waist. Fits Top of Hip Range Size CM IN 2XS 72-77 28-30 XS 78-83 30.5-32.5 S 84-89 33-35 M 90-95 35.5-37.5 L 96-101 38-40 XL 102-107 40-42 2XL 108-113 43-45 3XL 114-119 45-47 Standard - Fits Person With Inleg Length Size CM IN 2XS 77.5 30.5 XS 78.5 31 S 79.5 31 M 80.5 32 L 81.5 32 XL 82.5 32.5 2XL 82.5 32.5 3XL 82.5 32.5 Short- Fits Person With Inleg Length Size CM IN 2XS 71.5 28 XS 72.5 28.5 S 73.5 29 M 74.5 29 L 75.5 30 XL 76.5 30 2XL 76.5 30 3XL 76.5 30 Tall - Fits Person With Inleg Length Size CM IN 2XS 83.5 33 XS 84.5 33 S 85.5 33.5 M 86.5 34 L 87.5 34.5 XL 88.5 35 2XL 88.5 35 3XL 88.5 35 Approx Jeans Equivalent Waist Size Size CM IN 2XS 69 27 XS 75 30 S 81 32 M 87 35 L 93 37 XL 99 39 2XL 105 42 3XL 111 44 Ships directly from Clogger

$325.00

View product

DefenderPRO Gen2 Tough UL Women's Chainsaw Pants By Clogger

Clogger’s toughest chainsaw pants are now even cooler. When your day involves a little of everything or beating through thickets of thorns, then the DefenderPRO chainsaw pant is for you. Tough with full flex thanks to the ripstop Cordura® outer with 4-way stretch. And when the heat is up the new huge cross flow vents will keep you cool.  Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for rotation if a chainsaw strikes. Outer construction and design Outer fabric is tough and breathable Cordura® ripstop outer. 4-way stretch fabric for greater freedom of movement with FlexZone in the seat seam for extra give. PFC free DWR outer to repel water and oil. Elasticized waist for a snug fit and extra comfort. Lock stitched seams and reinforced stress points. Tree people specific detail NEW - 2 huge cross flow mesh side vents for maximum cooling. NEW - UL label located at rear for easy visibility. 1 zipped pocket on thigh ideal for cellphone or accessories - accessible while wearing a harness. Strong, durable zippers with a tight seal to reduce the risk of sawdust damage. Special zipper pulls on the pockets to make accessing your pockets easy even when wearing gloves. Wide belt loops to fit up to a 2 inch belt. Mesh lining for enhanced breathability. Opening at hems to remove debris. Weight Lightweight design, just 2.2 lb (Medium). Options Protection: Front only. Fit: Men's or Women's Size: 2XS - 3XL. Leg Length: Short, Standard, Tall. Note 1: IMPORTANT These pants across Short, Standard, and Tall all include an additional 5cms/2 inches of length to allow for lift from kneeling and knee flex/bending.Note 2: These garments are designed to be 'mid-rise', i.e. the top of the waistband will sit on the top of the hips, not as high as the natural waist. Fits Top of Hip Range Size CM IN 2XS 72-77 28-30 XS 78-83 30.5-32.5 S 84-89 33-35 M 90-95 35.5-37.5 L 96-101 38-40 XL 102-107 40-42 2XL 108-113 43-45 3XL 114-119 45-47 Standard - Fits Person With Inleg Length Size CM IN 2XS 77.5 30.5 XS 78.5 31 S 79.5 31 M 80.5 32 L 81.5 32 XL 82.5 32.5 2XL 82.5 32.5 3XL 82.5 32.5 Short- Fits Person With Inleg Length Size CM IN 2XS 71.5 28 XS 72.5 28.5 S 73.5 29 M 74.5 29 L 75.5 30 XL 76.5 30 2XL 76.5 30 3XL 76.5 30 Tall - Fits Person With Inleg Length Size CM IN 2XS 83.5 33 XS 84.5 33 S 85.5 33.5 M 86.5 34 L 87.5 34.5 XL 88.5 35 2XL 88.5 35 3XL 88.5 35 Approx Jeans Equivalent Waist Size Size CM IN 2XS 69 27 XS 75 30 S 81 32 M 87 35 L 93 37 XL 99 39 2XL 105 42 3XL 111 44 Ships directly from Clogger

From $235.00

View product

DefenderPRO Gen2 Tough Women's UL Chainsaw Pants With 360 Calf Wrap By Clogger

WHY WE MADE THIS: Designed for the professional tree workers who work mostly on the ground, this pant offers a tough outer but is still full stretch, light and cool to wear. The All Season Edition features zipped vents so you can adjust to temperature changes. CERTIFICATION: Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266 SHORT AND TALL VARIATIONS:These specific styles are made to order products which have an additional lead time of 1-2 weeks Are you ready to meet Clogger’s toughest chainsaw pants yet? We get it. Your work day can be all over the place. A bit of climbing here, a bit of ground clean up there and throw in some bucket work - all in one day. The DefenderPRO Gen2 is designed for you.The DefenderPRO is arguably our toughest trouser ever. Tough with full flex thanks to the all new ultra tough ripstop Cordura® outer with 4-way stretch. Light at just over 2 lb. Featuring adjustable cooling with Clogger’s zipped vents to help stay cool on warmer days. The Gen2 DefenderPROs include all design techniques and fit that has made Clogger so popular. The 360s offer additional safety features including 360 calf wrap protection and reflective hoops for visibility in low light conditions. Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for movement if a chainsaw strikes. Front with 360 calf wrap for additional protection. Outer construction and design Outer fabric is tough and breathable Cordura® ripstop outer. 4-way stretch fabric for greater freedom of movement with FlexZone in the seat seam for extra give. PFC free DWR outer to repel water and oil. Elasticized waist for a snug fit and extra comfort. Lock stitched seams and reinforced stress points. Tree people specific detail Adjustable cooling using 2 zipped rear vents to help stay cool on warmer days. 2 large zipped hip pockets that pull out to easily remove saw dust. 1 zipped pocket on thigh ideal for cellphone or accessories - accessible while wearing a harness. Strong, durable zippers with a tight seal to reduce the risk of sawdust damage. Special zipper pulls on the pockets to make accessing your pockets easy even when wearing gloves. Dual reflective hoops on both legs, to meet the performance requirements of high visibility standards ASTM107. Wide belt loops to fit up to a 2 inch belt. Mesh lining for enhanced breathability. Opening at hems to remove debris. Weight Lightweight design, just 2.4 lb (Medium). Options Protection: Front with 360 calf wrap. Fit: Men's. Size: XS - 3XL. Leg Length: Short, Standard, Tall. Ships directly from Clogger

$375.00

View product

DefenderPRO Tough Oil and Water Resistant UL Chainsaw Chaps Apron Style By Clogger

Strength re-engineered. DefenderPRO tough chainsaw chaps bring together the latest in technical fabric and design to redefine long lasting and rugged. The outer fabric is constructed from a new grade of specially developed nylon, increasing cut and abrasion resistance. Added to this is an oil and water resistant coating. DefenderPRO chaps are tough. They are practical. They are ready to defend. Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage. Outer construction and design 1,000 denier, high-tenacity nylon outer covering with oil and water resistance. Soft poly-cotton lining. 2 inch wide belt with quick release buckle. Tree people specific detail 5 rugged polypropylene straps to ensure a comfortable, safe and ultra-secure fit. Tough buckles designed for a long life and to withstand crushing. NEW - Leg buckles are replaceable. Easily replace in the field if damaged or broken. NEW - Each pair comes with a set of 2 replaceable buckles. Weight Lightweight design, just 2 lbs 6 oz (Medium). Ships directly from Clogger

$180.00

View product

DefenderPRO Tough Oil and Water Resistant UL Chainsaw Chaps Calf Wrap By Clogger

WHY WE MADE THIS: Redesigned for tree workers working on the ground, these chaps are designed to be tough enough to withstand everything from blackberry to mud while still being light and comfortable to wear. CERTIFICATION:Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266 Strength re-engineered. DefenderPRO tough chainsaw chaps bring together the latest in technical fabric and design to redefine long lasting and rugged. This version offers 360 calf wrap for extra protection. The outer fabric is constructed from a new grade of specially developed nylon, increasing cut and abrasion resistance. Added to this is an oil and water resistant coating. DefenderPRO chaps are tough. They are practical. They are ready to defend. Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with 360 calf wrap for additional protection. Outer construction and design 1,000 denier, high-tenacity nylon outer covering with oil and water resistance. Soft poly-cotton lining. 2 inch wide belt with quick release buckle. The adjustable waist extends to 49 inches. An additional 18 inch extension belt is available if required. Tree people specific detail 5 rugged polypropylene straps to ensure a comfortable, safe and ultra-secure fit. Tough buckles designed for a long life and to withstand crushing. NEW - Leg buckles are replaceable. Easily replace in the field if damaged or broken. NEW - Each pair comes with a set of 2 replaceable buckles. Weight Lightweight design, just 2 lbs 14 oz (Medium). Options Protection: 360 calf wrap for additional protection Sizes: S-L. Designed and made in Invercargill, New Zealand. Ships directly from Clogger

$200.00

View product

Delux SPEEDCUT NANO™ CONVERSION KIT

SpeedCut™ Nano Conversion Kits has been engineered from the ground up with maximum efficiency in mind. Built to optimize saw performance, SpeedCut Nano is the first .325 Low Profile system and meets the demands of tree care professionals like no other on the market. *Included with the Kit 1 - Speedcut Nano Kit 1 - 5/32" File 1 - 6" Flat File 2 - File Handles 1 - WCS Depth Plate

From $86.47

View product

Denim Men's UL Chainsaw Pants By Clogger

WHY WE MADE THIS: Designed with a classic denim look in mind, these jeans not only look good but have the hidden benefit of chainsaw protection. Lightweight yet tough, Denims are constructed with a durable abrasion resistant blend with stretch for easier movement. CERTIFICATION: Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266. GET THE EVERYDAY DENIM LOOK WITH FULL HIGH PERFORMANCE CHAINSAW PROTECTION Are you sick of the power ranger look and want chainsaw protection that ticks all the safety boxes while remaining both comfortable and casual looking? Introducing Denim from Clogger. Clogger's first chainsaw protective pant designed for a more traditional, laid back look. Clogger Denims are lightweight (2 lb 3 oz - size medium) with stretch that is flexible and easy to work in. Available in front protection style only with short and tall leg variations.Note: Denims do not have an elasticized waist so tend to run small compared with our other chainsaw pants. WHAT PEOPLE ARE SAYING “I love my Clogger Denims! The pockets are spot on. The phone pocket is perfect. My phone stays in one place and doesn't move around. I'll say this right now and here - I'm not buying anything but Clogger pants from here on out” “I have mine on as we speak and love them! Climbed half day, ground half day, then went finished up with servicing equipment. Great all around pants. Zippered phone pocket is clutch. I have noticed almost no difference in restriction of movement while climbing.” “I own multiple pairs of chainsaw protection. But I love my pair of denims. I'm looking forward to buying my crew some.” Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for movement if a chainsaw strikes. Outer construction and design Outer is constructed with an advanced stretch-woven fabric made from cotton, nylon and stretch polyester fibers that delivers an extremely high level of durability and light stretch without sacrificing structure. FlexZone in the seat seam for extra give. Straight jean cut with regular fit through hip and thigh and straight through the leg. Lock stitched seams and reinforced stress points. Tree people specific detail Classic Denim pocket styling with 2 front, 2 back. 1 zipped pocket on the thigh ideal for cellphone or accessories - accessible while wearing a harness. Strong, durable zippers with a better seal to reduce the risk of sawdust damage. Wide belt loops to fit up to a 2 inch belt. Mesh lining for enhanced breathability. Opening at hems to remove debris. Weight Lightweight design, just 2 lbs 3 oz (Medium). Options Protection: Front only. Fit: Men's or Women's Size: XS - 3XL. Leg Length: Short, Standard, Tall. Ships directly from Clogger Note 1: IMPORTANT: These pants all include an additional 2 inches of length to allow for lift from kneeling and knee flex/bending.Note 2: Denims do not have an elasticized waist so tend to run small compared with our other chainsaw pants. Note 3: These garments are designed to be 'mid-rise', i.e. the top of the waistband will sit on the top of the hips, not as high as the natural waist. Fits Top of Hip Size IN XS 32 S 34 M 36.5 L 39 XL 41 2XL 44 3XL 46 Standard- Fits Person With Inleg Length Size IN XS 31 S 31 M 32 L 32 XL 32.5 2XL 32.5 3XL 32.5 Short- Fits Person With Inleg Length Size IN XS 28.5 S 29 M 29 L 29.5 XL 30 2XL 30 3XL 30 Tall- Fits Person With Inleg Length Size IN XS 33 S 33.5 M 34 L 34.5 XL 35 2XL 35 3XL 35 Approx Jeans Equivalent Waist Size Size IN XS 30 S 32 M 35 L 37 XL 39 2XL 42 3XL 44

$325.00

View product

Denim Men's UL Chainsaw Pants By Clogger

WHY WE MADE THIS: Designed with a classic denim look in mind, these jeans not only look good but have the hidden benefit of chainsaw protection. Lightweight yet tough, Denims are constructed with a durable abrasion resistant blend with stretch for easier movement. CERTIFICATION: Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266. GET THE EVERYDAY DENIM LOOK WITH FULL HIGH PERFORMANCE CHAINSAW PROTECTION Are you sick of the power ranger look and want chainsaw protection that ticks all the safety boxes while remaining both comfortable and casual looking? Introducing Denim from Clogger. Clogger's first chainsaw protective pant designed for a more traditional, laid back look. Clogger Denims are lightweight (2 lb 3 oz - size medium) with stretch that is flexible and easy to work in. Available in front protection style only with short and tall leg variations.Note: Denims do not have an elasticized waist so tend to run small compared with our other chainsaw pants. WHAT PEOPLE ARE SAYING “I love my Clogger Denims! The pockets are spot on. The phone pocket is perfect. My phone stays in one place and doesn't move around. I'll say this right now and here - I'm not buying anything but Clogger pants from here on out” “I have mine on as we speak and love them! Climbed half day, ground half day, then went finished up with servicing equipment. Great all around pants. Zippered phone pocket is clutch. I have noticed almost no difference in restriction of movement while climbing.” “I own multiple pairs of chainsaw protection. But I love my pair of denims. I'm looking forward to buying my crew some.” Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for movement if a chainsaw strikes. Outer construction and design Outer is constructed with an advanced stretch-woven fabric made from cotton, nylon and stretch polyester fibers that delivers an extremely high level of durability and light stretch without sacrificing structure. FlexZone in the seat seam for extra give. Straight jean cut with regular fit through hip and thigh and straight through the leg. Lock stitched seams and reinforced stress points. Tree people specific detail Classic Denim pocket styling with 2 front, 2 back. 1 zipped pocket on the thigh ideal for cellphone or accessories - accessible while wearing a harness. Strong, durable zippers with a better seal to reduce the risk of sawdust damage. Wide belt loops to fit up to a 2 inch belt. Mesh lining for enhanced breathability. Opening at hems to remove debris. Weight Lightweight design, just 2 lbs 3 oz (Medium). Options Protection: Front only. Fit: Men's or Women's Size: XS - 3XL. Leg Length: Short, Standard, Tall. Ships directly from Clogger Note 1: IMPORTANT: These pants all include an additional 2 inches of length to allow for lift from kneeling and knee flex/bending.Note 2: Denims do not have an elasticized waist so tend to run small compared with our other chainsaw pants. Note 3: These garments are designed to be 'mid-rise', i.e. the top of the waistband will sit on the top of the hips, not as high as the natural waist. Fits Top of Hip Size IN XS 32 S 34 M 36.5 L 39 XL 41 2XL 44 3XL 46 Standard- Fits Person With Inleg Length Size IN XS 31 S 31 M 32 L 32 XL 32.5 2XL 32.5 3XL 32.5 Short- Fits Person With Inleg Length Size IN XS 28.5 S 29 M 29 L 29.5 XL 30 2XL 30 3XL 30 Tall- Fits Person With Inleg Length Size IN XS 33 S 33.5 M 34 L 34.5 XL 35 2XL 35 3XL 35 Approx Jeans Equivalent Waist Size Size IN XS 30 S 32 M 35 L 37 XL 39 2XL 42 3XL 44

$325.00

View product

Denim Women's UL Chainsaw Pants By Clogger

WHY WE MADE THIS: Designed with a classic denim look in mind, these jeans not only look good but have the hidden benefit of chainsaw protection. Lightweight yet tough, Denims are constructed with a durable abrasion resistant blend with stretch for easier movement. CERTIFICATION: Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266. GET THE EVERYDAY DENIM LOOK WITH FULL HIGH PERFORMANCE CHAINSAW PROTECTION Are you sick of the power ranger look and want chainsaw protection that ticks all the safety boxes while remaining both comfortable and casual looking? Introducing Denim from Clogger. Clogger's first chainsaw protective pant designed for a more traditional, laid back look. Clogger Denims are lightweight (2 lb 3 oz - size medium) with stretch that is flexible and easy to work in. Available in front protection style only with short and tall leg variations.Note: Denims do not have an elasticized waist so tend to run small compared with our other chainsaw pants. WHAT PEOPLE ARE SAYING “I love my Clogger Denims! The pockets are spot on. The phone pocket is perfect. My phone stays in one place and doesn't move around. I'll say this right now and here - I'm not buying anything but Clogger pants from here on out” “I have mine on as we speak and love them! Climbed half day, ground half day, then went finished up with servicing equipment. Great all around pants. Zippered phone pocket is clutch. I have noticed almost no difference in restriction of movement while climbing.” “I own multiple pairs of chainsaw protection. But I love my pair of denims. I'm looking forward to buying my crew some.” Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for movement if a chainsaw strikes. Outer construction and design Outer is constructed with an advanced stretch-woven fabric made from cotton, nylon and stretch polyester fibers that delivers an extremely high level of durability and light stretch without sacrificing structure. FlexZone in the seat seam for extra give. Straight jean cut with regular fit through hip and thigh and straight through the leg. Lock stitched seams and reinforced stress points. Tree people specific detail Classic Denim pocket styling with 2 front, 2 back. 1 zipped pocket on the thigh ideal for cellphone or accessories - accessible while wearing a harness. Strong, durable zippers with a better seal to reduce the risk of sawdust damage. Wide belt loops to fit up to a 2 inch belt. Mesh lining for enhanced breathability. Opening at hems to remove debris. Weight Lightweight design, just 2 lbs 3 oz (Medium). Options Protection: Front only. Fit: Men's or Women's Size: XS - 3XL. Leg Length: Short, Standard, Tall. Ships directly from Clogger Note 1: IMPORTANT: These pants across Short, Standard and Tall all include an additional 5cm/2 inches of length to allow for lift from kneeling and knee flex/bending.Note 2: Denims do not have an elasticized waist so tend to run small compared with our other chainsaw pants. Note 3: These garments are designed to be 'mid-rise', i.e. the top of the waistband will sit on the top of the hips, not as high as the natural waist. Fits Person With Hip/Seat Size CM IN 2XS 89 35 XS 94 37 S 99 39 M 104 41 L 109 43 XL 114 45 2XL 119 47 Fits Top of Hip Size CM IN 2XS 81 32 XS 86 34 S 91 36 M 96 38 L 101 40 XL 106 42 2XL 111 44 Standard - Fits Person With Inleg Length Size CM IN 2XS 72 28 XS 73 29 S 74 29 M 75 29.5 L 76 30 XL 77 30 2XL 77 30 Short- Fits Person With Inleg Length Size CM IN 2XS 66 26 XS 67 26.5 S 68 27 M 69 27 L 70 27.5 XL 71 28 2XL 71 28 Tall- Fits Person With Inleg Length Size CM IN 2XS 78 31 XS 79 31 S 80 31.5 M 81 32 L 82 32 XL 83 33 2XL 83 33 Approx Women’s Size Size NZ, Aust, UK US EU 2XS 8 4 36 XS 10 6 38 S 12 8 40 M 14 10 42 L 16 12 44 XL 18 14 46 2XL 20 16 48

$325.00

View product

DEPTH GAUGE TOOL, .025"

This drop-center depth gauge tool ideal for professionals makes accurate and consistent depth gauge settings easy. PRODUCT DETAILS Built-in .025 depth gauge setting helps maintaining the level of safety and performance of the saw chain Tool set depth gauge to the recommended .025" depth for 3/8" low profile, .325" and 3/8" pitch saw chain

$4.99

~~$4.99~~ $4.99

DEPTH PLATE

The Westcoast Saw Depth Plate is designed to set raker heights on full-comp, semi-skip and full-skip chains. This plate gives the user several different depth options starting at 0.025 and goes down in 0.010 increments. The plate edge on the WCS logo side is designed to clean the rail bar. Made in the USA. Made in the USA. Made of durable high carbon steel.

$14.00

View product

DMM Hitch Climber Triple Attachment Pulley

Everyone's favourite Pulley! The Triple Attachment Pulley forms an integral part of the renowned Hitch Climber System and is a firm favourite of working at height professionals the world over. The three hole construction makes rigging and organising much simpler and allows for off-centre hanging to minimise rope to pulley friction.

$80.81

DMM Impact Block - 3/4" Large

The DMM Impact Block is a premium arborist block designed for incredible strength and premium performance. The most eye-catching feature of the block is the incredible strength, but it is more than just a rugged piece of gear. The Impact Block is designed to be rope-friendly on all surfaces. The 3/4" version of the Impact block has a hollow stainless steel spindle which opens up advanced rigging options. The lower sheave is over 4" wide for a wider bend radius that preserves more strength in the rigging line. This premium arborist block is suitable for medium to heavy tree rigging. See the videos tab for an overview as well as videos of the testing process DMM went through to develop the Impact Block. Specifications Manufacturer: DMM Maximum rope diameter: 20mm (3/4+") Sheave diameter: 107.95mm (4.25") Tensile strength: 300 kN (67,442.55 lb) Material: aluminum Dimensions: 230 x 125 x 90mm (9 x 4.9 x 3.5") Weight: 3.47 kg (7.65 lb) Made in Wales Certifications CE NFPA 1986 (06ED) Class G EN795(b):1997 EN12278:2007

$599.95

DMM Kinisi Max Saddle

Description: The Kinisi is a modular and hard wearing sit harness, ideal for use across a range of tree care, aerial and rescue applications. Maximum comfort and support. Webbing is woven through a supporting material and then padded with foam, providing comfort by spreading the user's weight over a large surface area. This structural webbing is then slimmed down where bulk would inhibit movement. Designed to last. All hardware is optimized to be textile friendly and reduce webbing wear. Replaceable components for enhanced lifespan. Users have the option to replace the pads, elastic keeper loops, leg elastics and loops, rear elastics, riser webbing, bridges, and bridge hardware. Brand: DMM Details: Independently evaluated to the performance requirements of the following international standards: ASNZ 1891 – Pass ANSI/ASSP - Z359.12-2019 – Pass CAN/CSA - Z259.12 – Pass ASTM F0887-20 – Pass except the structural webbing is under 44.5mm and the harness has a rear attachment point. CSA Z259.1-05 PD saddle – Pass except the structural webbing is under 41mm. Vast customisation options: Customisable rope and webbing bridges. Available in a variety of different terminations and lengths. Removeable webbing stoppers. Webbing lengths can be shortened to the user's requirements. Bosun Chair compatible. Eyelets on the forward Ds can be combined with the Bosun Chair kit. Attachment slots for non-PPE upper assemblies. DMM component compatibility: DMM harness accessories. Pre-cut holes allow use of XSRE carabiners, Stowaways, and the Caiman. Multiple storage solutions. Gear brackets allow use of the Vault range and Parking Lot. Harness attachments for restraint according to EN358. Rear restraint point can be used with classic DMM hardware such as the PerfectO, Ultra O, and AmericanO. Harness attachments for work positioning according to EN358. Side rings can be used with classic DMM hardware such as the PerfectO, Ultra O, and AmericanO. Harness attachments for suspension and work positioning according to EN813. Forward Ds are compatible with DMM connectors. Rope bridges work with a range of hardware including Anchor Rings, Ultra O, Axis Swivels or the Rigger Pulley. Webbing bridges work with Anchor Rings, AmericanO, Compact Shackle, and Axis Swivels. Specs for Size: Small Color: Black Weight: 2400g Hip Dims. (in): 25 - 33 Leg Dims. (in): 17 - 23 Max. user weight (lbs): 330 Rope Bridge Ø (mm): 10 Certification: EN358:2018 / EN813:2008 Specs for Size: Medium Color: Black Weight: 2800g Hip Dims. (in): 31 - 40 Leg Dims. (in): 18 - 25 Max. user weight (lbs): 330 Rope Bridge Ø (mm): 10 Certification: EN358:2018 / EN813:2008 Specs for Size: Large Color: Black Weight: 3000g Hip Dims. (in): 35 - 48 Leg Dims. (in): 20 - 29 Max. user weight (lbs): 330 Rope Bridge Ø (mm): 10 Certification: EN358:2018 / EN813:2008

$857.99

DMM XSRE Miniature Carabiner

The diminutive XSRE carabiner from DMM may initially seem like a luxury indulgence, but its performance quickly proves otherwise. Despite its small size, this carabiner packs a powerful punch, boasting both sleek aesthetics and impressive strength. The hot-forged I-Beam body forms the sturdy foundation of this featherweight champion, while the keylock nose facilitates smooth rope piercing and minimizes the risk of snagging. Renowned for its versatility, the XSRE carabiner stands out as the ultimate high-performance accessory, offering a multitude of potential applications. Once you experience its capabilities, you'll find it indispensable in countless scenarios. Sold individually, you can personalize your choice by selecting from a range of vibrant colors.

$15.07

View product

Double Braid Dead-eye Rigging Sling 1/2"

Dead-eye tree rigging slings have a large eye which is perfect for girth-hitching the sling on rigging hardware. Our eye slings are made from premium arborist tree rigging ropes. All of our tree-rigging slings are hand-spliced by the professional rope splicers at Iron Street Rope Splicing. We can also have a custom sling spliced to your specifications.

From $37.87

View product

Double Esterlon 13mm (1/2")

Yale Double Esterlon proves itself as the optimal choice for lowering systems. Engineered with strength, durability, and minimal stretch in mind, Double Esterlon stands out as a double-braided rope crafted from premium over finish polyester fiber in both its sleeve and core. Easily identified by two green strands in the cover, this rope is further enhanced with Yale's Tree-Grade Maxijacket urethane coating for heightened performance and longevity. Specifications: Manufacturer: Yale Cordage Diameter: 13mm (1/2+") Construction: Double-braid Tensile Strength: 11,000 lb ABS Elongation: 2% at 10% ABS Weight per 100' / 100m: 8.1 lb / 12.1 kg Spliceable: Yes Sewn Eyes: No Origin: Made in the USA

From $147.00

View product

DSG 4000 STEEL

Robust steel carabiner with palm squeeze mechanism for use in PPE systems. Features Keylock closure mechanism for optimum handling when clipping and unclipping Palm squeeze mechanism prevents unintentional opening and ensures easy handling Technical Information Width: 75 mm Length: 141 mm Gate opening: 25 mm Fmax. major axis: 40 kN Fmax. minor axis : 10 kN Fmax. open : 23 kN Certification : EN 12275 Certification : EN 362 Material : Steel

$29.95

DSG TRITON

Robust aluminium carabiner with palm squeeze mechanism for use in PPE systems. Features Keylock closure mechanism for optimum handling when clipping and unclipping Palm squeeze mechanism prevents unintentional opening and ensures easy handling Technical Information Width: 71 mm Length: 136 mm Gate opening: 25 mm Fmax. major axis: 33 kN Fmax. minor axis : 8 kN Fmax. open : 12 kN Certification : EN 12275 Certification : EN 362 Material : Aluminium Closure : Keylock

$34.95

dynaGLIDE

Throwline of pure Dyneema® dynaGLIDE from TEUFELBERGER is a coated throwline that, due to its neon colors, is easily visible in trees. dynaGLIDE is a hollow braid throwline of pure Dyneema®. This throwline from TEUFELBERGER is coated and has a strong signaling effect due to its neon colors. The orange or green of the throwline provides for good visibility in the trees. Its coating ensures very little elongation and better gliding characteristics on bark. The dynaGLIDE throwline impresses with: Very high strength Polyurethane coating for better abrasion resistance Smooth surface gliding readily over rough bark Good visibility due to neon colors

From $60.00

View product

Dyneema Runner Slings

Versatile, lightweight, and robust, these slings offer myriad uses for climbers across various scenarios. Perfect for light-duty applications where dynamic loads are not required, they excel in creating custom ascender slings, quick draws, and redirects. Please note that the color may vary. Crafted from a blend of Dyneema and Nylon fibers, Dyneema webbing boasts a combination of superior properties, ensuring reliability and durability in every climb. Features & Benefits: 14mm Dyneema Webbing Continuous sewn loop Strength: 24 kN

From $9.50

View product

EASHOOK OPEN

Connector with gated connection point for double lanyard and work positioning lanyard The EASHOOK OPEN connector is designed for use at the ends of a double lanyard or work positioning lanyard. The gated connection point allows for direct attachment of the connector to the lanyards If the lanyard is damaged, the connector can thus be reused The excellent grip and automatic locking system facilitate handling when passing intermediate anchors. Detailed description Designed for use at the ends of ABSORBICA-Y, PROGRESS or PROGRESS ADJUST-type double lanyards and the GRILLON-type work positioning lanyard Removable connector:- gated connection point allows for direct attachment of the connector to the lanyards. If the lanyard is damaged, the connector can thus be reused- special connection point helps keep the carabiner loaded on the major axis Facilitates handling when passing intermediate anchors:- ergonomic shape for excellent grip- automatic double-action locking system is easy to use- wide opening for easy connection of the connector- Keylock system, to avoid any involuntary snagging of the connector H-shaped cross-section:- ensures an improved strength-to-weight ratio- protects markings from abrasion Also available in black Specifications Material(s): aluminum Certification(s): CE EN 362, UKCA, EAC

From $47.95

View product

ECW Camo 9mm Eye & Eye Prusik

Utilize this 28" eye-to-eye prusik in conjunction with a compatible carabiner to create a secure friction hitch on your climbing rope or positioning lanyard.

$21.00

Edelrid Skinny Gloves

Thin calfskin working glove which is reinforced at neuralgic points. Ideal for belaying, aid climbing, and via ferratas. Features: Robust leather on the palms and the underside of the fingers Leather reinforcements on the fore and little finger Elasticated wristband with VCR strap EDELRID logo stitched onto the back of the hands Pull tab on the wrist for easy on/offs and hanging up by a carabiner Back of hand and fingers made of elastic 4-way stretch material Technical Info Material : Palm: 100% Leather / Back of Hand: 98% Polyester, 2% Elastane UV protection

From $34.95

View product

Edelrid TreeRex Climbing Harness

23.06.2021 Statement from Edelrid Regarding The EDELRID TRIPLE LOCK Buckle https://www.edelrid.de/en/service/recalls/statement-triple-lock-buckle.php The most versatile tree-care harness of all time. With a variety of rope bridge configurations and optional SRT BRIDGE for safe and comfortable working on single ropes. The innovative 3D Vent Technology, in combination with the wide, semi-rigid padding, ensures unsurpassed hanging comfort and at the same time good breathability. 4 large gear loops, numerous attachment possibilities for gear carabiners as well as a device for suspending a chainsaw round off the complete package of this unique climbing harness. The TREEREX is supplied pre-assembled with an adjustable rope bridge in the lateral eyelets and an aluminium connecting ring. Size 1: XS-M (86 - 109 cm, 27"-43") Size 2: L-XL (92 - 129 cm, 33"-48") PRODUCT INFORMATION 3D Vent Technology: unbeatable support and comfort through three-dimensional molding, with extensive force distribution and maximum breathability All load-bearing straps are equipped with indicator tape; red fibers become visible in the event of damage and signal to the user that the harness should be replaced Triple Lock buckles on the waist belt and leg loops allows it to be easily put on and taken off Leg loop straps with textile abrasion protectors made from Dyneema® Lateral fastening eyelets in the leg loops for installing up to two rope bridges or for workplace stabilization The angle of the lateral fastening eyelets can also be adjusted under load thanks to a smart adjustment mechanism for an optimum working position in the tree 2 color-coded rope bridges and one anchor ring for maximum lateral freedom of movement TECHNICAL INFORMATION CE marking: yes country of origin: Vietnam Fall Arrest Eyelet Front: Yes Lataral Eyelets: Yes

$561.70

View product

Edelrid Work Open Gloves

Robust work glove with open fingertips. Ideal for jobs that require good dexterity. Features Palms made of robust leather Pull-off loop on the forefinger Pull tab on the wrist for easy on/offs and hanging up by a carabiner Back of hand and fingers made of elastic 4-way stretch material Elasticated wristband with VCR strap EDELRID logo stitched onto the back of the hands Technical Info Material : Palm: 100% Leather / Back of Hand: 98% Polyester, 2% Elastane UV protection

$29.95

View product

Elevated Edition Zero Gen2 Light and Cool Men's Arborist UL Chainsaw Pants - Black/Red By Clogger

WHY WE MADE THIS: Developed with Academy Trained to promote the mission of ELEVATING the standard in the Industry. Designed for the climbing arborist who works in hot conditions, these pants are cool and light but still tough with a ripstop outer. CERTIFICATIONS: Certified by Underwriters Laboratories (UL) to ASTM F1897-20 for USA and meets OSHA regulation 1910-266 SHORT AND TALL VARIATIONS:These specific styles are made to order products which have an additional lead time of 1-2 weeks Clogger and Academy Trained are both dedicated to enhancing lives by ELEVATING the standard of the Industry. The Elevated Edition Zeros were developed by Clogger and Academy Trained to promote this mission. Made in the distinctive black outer fabric with red flash and featuring an embroidered Elevated logo and circular Elevated symbol, the Elevated edition Zeros are a unique way to show your support in Elevating the standard of the Industry through SAFETY TRAINING and INNOVATION. You also get to have a better day at work in one of the world’s leading chainsaw protective pants. 10% of the proceeds will go to the Elevated Scholarship Fund. This Fund will provide training for tree workers who are not in a position to finance training themselves but have demonstrated a desire to elevate their skills and advance in the industry. Academy Trained will be working with other training companies and organizations to ensure these individuals get the proper training to advance their skills. Chainsaw protection Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection. Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance. Waist to ankle coverage with extra coverage on the left side to allow for movement if a chainsaw strikes. Outer construction and design Outer fabric is engineered to lower body temperature by dispersing body heat through breathability and the use of Nilit® Breeze yarn - Nilit® is proven to reduce body temperature. 4-way stretch fabric for greater freedom of movement and flexibility with FlexZone in the seat seam for extra give. High-tenacity nylon with a ripstop weave for a 1.5x stronger outer. DWR water resistant coating. Abrasion resistant fabric over the knee, the inside of the calf and ankle areas increasing the durability in these high wear areas. Ultra-high tear strength Dyneema fabric at the right calf to protect against small cuts caused by the chainsaw when hanging off the harness. Elasticized waist for a snug fit and extra comfort. Lock stitched seams and reinforced stress points. Tree people specific detail 2 tough, large cross flow mesh side vents for maximum cooling. 2 zipped hip pockets; 2 zipped thigh pockets individually sewn to be able to remove saw dust with an additional pocket on the left thigh. Lower pockets are all accessible while wearing a harness. Strong, durable zippers with a better seal to reduce the risk of sawdust damage. Special zipper pulls on the pockets to make accessing your pockets easy even when wearing gloves. Boot hooks made from durable plastic construction that has been reversed to prevent snagging on throw lines all while still securely holding pants in place when climbing. Wide belt loops to fit up to a 2 inch belt. Mesh lining for enhanced breathability. Opening at hems to remove debris. High-visibility panels front and rear. Weight Lightweight design, just 2 lbs 3 oz (Medium). Ships directly from Clogger Note 1: IMPORTANT Our climbing pants across Tall, Standard and Short, all include an additional 6cms/2.5 inches of length to allow for lift from the harness and knee flex/bending while climbing.Note 2: These garments are designed to be 'mid-rise', i.e. the top of the waistband will sit on the top of the hips, not as high as the natural waist. Fits Top of Hip Range Size CM IN 2XS 71-77 28-30 XS 78-83 30.5-32.5 S 84-89 33-35 M 90-95 35.5-37.5 L 96-101 38-40 XL 102-107 40-42 2XL 108-113 43-45 3XL 114-119 45-47 Standard- Fits Person With Inleg Length Size CM IN 2XS 76.5 30 XS 78 31 S 79.5 31 M 80.5 32 L 81.5 32 XL 82.5 32.5 2XL 82.5 32.5 3XL 82.5 32.5 Short- Fits Person With Inleg Length Size CM IN 2XS 70.5 27.5 XS 72 28 S 73.5 29 M 74.5 29 L 75.5 30 XL 76.5 30 2XL 76.5 30 3XL 76.5 30 Tall- Fits Person With Inleg Length Size CM IN 2XS 82.5 32 XS 84 33 S 85.5 33.5 M 86.5 34 L 87.5 34.5 XL 88.5 35 2XL 88.5 35 3XL 88.5 35 Approx Jeans Equivalent Waist Size Size CM IN 2XS 69 27 XS 75 30 S 81 32 M 87 35 L 93 37 XL 99 39 2XL 105 42 3XL 111 44

$430.00

View product

Products

Saw Giveaway!

Our best sellers

Products

Saw Giveaway!

Our best sellers

Subscribe to our emails