Products

Filters

View

Filters

Price

$ 0

$ 5000000

$
$

Spider Men's Climbing and Work Pants (Not Chainsaw Protective) By Clogger

WHY WE MADE THIS: Designed for competitive tree climbers, these pants are cool to wear, stretchy, but also tough with abrasion resistant lower legs and padded knees and shins. SAFETY MESSAGE:These are not chainsaw protective MADE TO ORDER:Short, Tall and 3XL are made to order products and have an additional lead time of 1-2 weeks.   Taking inspiration from those that climb. Those that go further. Those that explore. Spider is a new breed of climbing trousers for professional arborists and rope access pros. With 360-degree stretch, advanced fabric strength and Nilit® Breeze cooling capabilities…you can go in any direction and set your own limits. Then go beyond them. Outer construction and design Outer fabric, engineered to lower body temperature by dispersing body heat through breathability and the use of Nilit® Breeze Yarn - Nilit® is proven to reduce body temperature. 4-way stretch fabric for greater freedom of movement and flexibility with FlexZone in the seat seam for extra give. Abrasion resistant fabric over the knee and the inside of the ankle areas increasing the durability in these high wear areas. Elasticized waist for a snug fit and extra comfort. Lock stitched seams and reinforced stress points. Padded knee and shin. Tree people specific detail Tough, large cross flow mesh side vents for maximum cooling. 2 zipped hip pockets; 2 zipped thigh pockets individually sewn to be able to remove saw dust with an additional pocket on the left thigh. Lower pockets are all accessible while wearing a harness. Strong, durable zippers with a better seal. Special zipper pulls on the pockets to make accessing your pockets easy even when wearing gloves. Boot hooks made from durable plastic construction that has been reversed to prevent snagging on throw lines all while still securely holding pants in place when climbing. Wide belt loops to fit up to a 2 inch belt. Opening at hems to remove debris. High-strength gusseted crotch for extra mobility. Weight Lightweight design, less than 0.6kg/1lb, 3oz (Medium). Options Color: Contrast - Grey with orange panels, or Grey. Fit: Men's or Women's Size: XS - 3XL. Leg Length: Short, Standard, Tall. Ships directly from Clogger 2XS 71-77 28-30 XS 78-83 30.5-32.5 S 84-89 33-35 M 90-95 35.5-37.5 L 96-101 38-40 XL 102-107 40-42 2XL 108-113 43-45 3XL 114-119 45-47 Standard- Fits Person With Inleg Length Size CM IN 2XS 76.5 30 XS 78 31 S 79.5 31 M 80.5 32 L 81.5 32 XL 82.5 32.5 2XL 82.5 32.5 3XL 82.5 32.5 Short- Fits Person With Inleg Length Size CM IN 2XS 70.5 27.5 XS 72 28 S 73.5 29 M 74.5 29 L 75.5 30 XL 76.5 30 2XL 76.5 30 3XL 76.5 30 Tall- Fits Person With Inleg Length Size CM IN 2XS 82.5 32.5 XS 84 33 S 85.5 33.5 M 86.5 34 L 87.5 34.5 XL 88.5 35 2XL 88.5 35 3XL 88.5 35 Approx Jeans Equivalent Waist Size Size CM IN 2XS 69 27 XS 75 30 S 81 32 M 87 35 L 93 37 XL 99 39 2XL 105 42 3XL 111 44

Regular price $250.00
Regular price Sale price $250.00
Unit price  per 
View product

Spider Women's Climbing and Work Pants (Not Chainsaw Protective) By Clogger

WHY WE MADE THIS: Designed for competitive tree climbers, these pants are cool to wear, stretchy, but also tough with abrasion resistant lower legs and padded knees and shins. SAFETY MESSAGE:These are not chainsaw protective MADE TO ORDER:Short, Tall and 3XL are made to order products and have an additional lead time of 1-2 weeks.   Taking inspiration from those that climb. Those that go further. Those that explore. Spider is a new breed of climbing trousers for professional arborists and rope access pros. With 360-degree stretch, advanced fabric strength and Nilit® Breeze cooling capabilities…you can go in any direction and set your own limits. Then go beyond them. Outer construction and design Outer fabric, engineered to lower body temperature by dispersing body heat through breathability and the use of Nilit® Breeze Yarn - Nilit® is proven to reduce body temperature. 4-way stretch fabric for greater freedom of movement and flexibility with FlexZone in the seat seam for extra give. Abrasion resistant fabric over the knee and the inside of the ankle areas increasing the durability in these high wear areas. Elasticized waist for a snug fit and extra comfort. Lock stitched seams and reinforced stress points. Padded knee and shin. Tree people specific detail Tough, large cross flow mesh side vents for maximum cooling. 2 zipped hip pockets; 2 zipped thigh pockets individually sewn to be able to remove saw dust with an additional pocket on the left thigh. Lower pockets are all accessible while wearing a harness. Strong, durable zippers with a better seal. Special zipper pulls on the pockets to make accessing your pockets easy even when wearing gloves. Boot hooks made from durable plastic construction that has been reversed to prevent snagging on throw lines all while still securely holding pants in place when climbing. Wide belt loops to fit up to a 2 inch belt. Opening at hems to remove debris. High-strength gusseted crotch for extra mobility. Weight Lightweight design, less than 0.6kg/1lb, 3oz (Medium). Options Color: Contrast - Grey with orange panels, or Grey. Fit: Men's or Women's Size: XS - 3XL. Leg Length: Short, Standard, Tall. Ships directly from Clogger Size CM IN 2XS 89 35 XS 94 37 S 99 39 M 104 41 L 109 43 XL 114 45 2XL 119 47 Fits Top of Hip Range Size CM IN 2XS 79-83 31-33 XS 84-88 33-35 S 89-93 35-37 M 94-98 37-39 L 99-103 39-41 XL 104-108 41-43 2XL 109-113 43-45 Standard Fits Person With Inleg Length Size CM IN 2XS 72 28 XS 73 29 S 74 29 M 75 29.5 L 76 30 XL 77 30 2XL 77 30 Short Fits Person With Inleg Length Size CM IN 2XS 66 26 XS 67 26.5 S 68 27 M 69 27 L 70 27.5 XL 71 28 2XL 71 28 Tall Fits Person With Inleg Length Size CM IN 2XS 78 31 XS 79 31 S 80 31.5 M 81 32 L 82 32 XL 83 33 2XL 83 33 Approx Women’s Size Size NZ, Aust, UK US EU 2XS 8 4 36 XS 10 6 38 S 12 8 40 M 14 10 42 L 16 12 44 XL 18 14 46 2XL 20 16 48

Regular price $250.00
Regular price Sale price $250.00
Unit price  per 
View product
Regular price $61.10
Regular price Sale price $61.10
Unit price  per 
Regular price $49.95
Regular price Sale price $49.95
Unit price  per 
Regular price $65.95
Regular price Sale price $65.95
Unit price  per 
Regular price $27.55
Regular price Sale price $27.55
Unit price  per 
Regular price $61.10
Regular price Sale price $61.10
Unit price  per 
Regular price $27.55
Regular price Sale price $27.55
Unit price  per 

STEIN ELEVATE Climber Kit - 43mm Gaffs (Black)

ELEVATE your Climb The all-new STEIN ELEVATE Climbing Spurs. The one-piece Aluminium Shank has a 5-degree off-set tilt which allows the spur to align with your stance, and facilitates the downward force required straight from the leg through the gaff into the pole or trunk. The shank is hard anodised to help protect the aluminium and prolong its durability.  The shank is fitted with a series of adjustment holes giving a 90mm height variant. Specially designed threaded inserts are used to attach the Calf Pad which avoids threading the holes in the spurs alleviating any cross-threading issues. As all climbers' lower legs and calves are different the ELEVATE Calf Pad is manufactured from 2mm Aluminium which can be manipulated to your carf width unlike solid pads. This feature allows for a more secure fit around your calf.  The Calf Pad is fully height adjustable with a 90mm variant in height and has the option to be off-set by 4-degrees to help facilitate climber comfort. The washable Inner Pad is ribbed vertically for added comfort and aids ventilation, the pad is secured in the Aluminium shell via heavy duty hook & loop. The ELEVATE Spurs are secured to the leg using 100mm wide Hook & Loop system and a traditional synthetic leather strap with buckle for a secure comfortable fit. Warning Activities using this type of equipment are inherently dangerous. It is not possible to cover every eventuality relating to the use of this equipment. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Only the techniques shown in the diagrams are authorised.  Any other use deviating from those shown may result in serious injury or death. Prior to each use a complete risk assessment must be carried out to ascertain that the device chosen configures with and is appropriate to the work being undertaken.  As part of any method statement we recommend that all users of this equipment are given a copy of the instructions. They must read them, understand them and explicitly follow all instructions and cautions attached. Any person using this equipment should be fully trained and competent in its use

Regular price $399.00
Regular price Sale price $399.00
Unit price  per 

STEIN ELEVATE Climber Kit - 43mm Gaffs (Blue)

ELEVATE your Climb The all-new STEIN ELEVATE Climbing Spurs. The one-piece Aluminium Shank has a 5-degree off-set tilt which allows the spur to align with your stance, and facilitates the downward force required straight from the leg through the gaff into the pole or trunk. The shank is hard anodised to help protect the aluminium and prolong its durability.  The shank is fitted with a series of adjustment holes giving a 90mm height variant. Specially designed threaded inserts are used to attach the Calf Pad which avoids threading the holes in the spurs alleviating any cross-threading issues. As all climbers' lower legs and calves are different the ELEVATE Calf Pad is manufactured from 2mm Aluminium which can be manipulated to your carf width unlike solid pads. This feature allows for a more secure fit around your calf.  The Calf Pad is fully height adjustable with a 90mm variant in height and has the option to be off-set by 4-degrees to help facilitate climber comfort. The washable Inner Pad is ribbed vertically for added comfort and aids ventilation, the pad is secured in the Aluminium shell via heavy duty hook & loop. The ELEVATE Spurs are secured to the leg using 100mm wide Hook & Loop system and a traditional synthetic leather strap with buckle for a secure comfortable fit. Warning Activities using this type of equipment are inherently dangerous. It is not possible to cover every eventuality relating to the use of this equipment. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Only the techniques shown in the diagrams are authorised.  Any other use deviating from those shown may result in serious injury or death. Prior to each use a complete risk assessment must be carried out to ascertain that the device chosen configures with and is appropriate to the work being undertaken.  As part of any method statement we recommend that all users of this equipment are given a copy of the instructions. They must read them, understand them and explicitly follow all instructions and cautions attached. Any person using this equipment should be fully trained and competent in its use

Regular price $399.00
Regular price Sale price $399.00
Unit price  per 

Sold out

STEIN ELEVATE Climber Kit - 67mm Gaffs (Black). Temporary Backorder.

ELEVATE your Climb The all-new STEIN ELEVATE Climbing Spurs. The one-piece Aluminium Shank has a 5-degree off-set tilt which allows the spur to align with your stance, and facilitates the downward force required straight from the leg through the gaff into the pole or trunk. The shank is hard anodised to help protect the aluminium and prolong its durability.  The shank is fitted with a series of adjustment holes giving a 90mm height variant. Specially designed threaded inserts are used to attach the Calf Pad which avoids threading the holes in the spurs alleviating any cross-threading issues. As all climbers' lower legs and calves are different the ELEVATE Calf Pad is manufactured from 2mm Aluminium which can be manipulated to your carf width unlike solid pads. This feature allows for a more secure fit around your calf.  The Calf Pad is fully height adjustable with a 90mm variant in height and has the option to be off-set by 4-degrees to help facilitate climber comfort. The washable Inner Pad is ribbed vertically for added comfort and aids ventilation, the pad is secured in the Aluminium shell via heavy duty hook & loop. The ELEVATE Spurs are secured to the leg using 100mm wide Hook & Loop system and a traditional synthetic leather strap with buckle for a secure comfortable fit. Warning Activities using this type of equipment are inherently dangerous. It is not possible to cover every eventuality relating to the use of this equipment. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Only the techniques shown in the diagrams are authorised.  Any other use deviating from those shown may result in serious injury or death. Prior to each use a complete risk assessment must be carried out to ascertain that the device chosen configures with and is appropriate to the work being undertaken.  As part of any method statement we recommend that all users of this equipment are given a copy of the instructions. They must read them, understand them and explicitly follow all instructions and cautions attached. Any person using this equipment should be fully trained and competent in its use

Regular price $399.00
Regular price Sale price $399.00
Unit price  per 
View product

STEIN ELEVATE Climber Kit - 67mm Gaffs (Blue). Temporoary backorder.

ELEVATE your Climb The all-new STEIN ELEVATE Climbing Spurs. The one-piece Aluminium Shank has a 5-degree off-set tilt which allows the spur to align with your stance, and facilitates the downward force required straight from the leg through the gaff into the pole or trunk. The shank is hard anodised to help protect the aluminium and prolong its durability.  The shank is fitted with a series of adjustment holes giving a 90mm height variant. Specially designed threaded inserts are used to attach the Calf Pad which avoids threading the holes in the spurs alleviating any cross-threading issues. As all climbers' lower legs and calves are different the ELEVATE Calf Pad is manufactured from 2mm Aluminium which can be manipulated to your carf width unlike solid pads. This feature allows for a more secure fit around your calf.  The Calf Pad is fully height adjustable with a 90mm variant in height and has the option to be off-set by 4-degrees to help facilitate climber comfort. The washable Inner Pad is ribbed vertically for added comfort and aids ventilation, the pad is secured in the Aluminium shell via heavy duty hook & loop. The ELEVATE Spurs are secured to the leg using 100mm wide Hook & Loop system and a traditional synthetic leather strap with buckle for a secure comfortable fit. Warning Activities using this type of equipment are inherently dangerous. It is not possible to cover every eventuality relating to the use of this equipment. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Only the techniques shown in the diagrams are authorised.  Any other use deviating from those shown may result in serious injury or death. Prior to each use a complete risk assessment must be carried out to ascertain that the device chosen configures with and is appropriate to the work being undertaken.  As part of any method statement we recommend that all users of this equipment are given a copy of the instructions. They must read them, understand them and explicitly follow all instructions and cautions attached. Any person using this equipment should be fully trained and competent in its use

Regular price $399.00
Regular price Sale price $399.00
Unit price  per 
Regular price $55.00
Regular price Sale price $55.00
Unit price  per 
Regular price $63.00
Regular price Sale price $63.00
Unit price  per 
Stein Floating Friction Device

Stein Floating Friction Device

LD750 Floating Friction Device for 1/2" Rope, LD1250 Floating Friction Device for 5/8" Rope,  LD1000 Floating Friction Device for 9/16" Rope LD1000  The Stein LD1000 Invert-A-Wrap is a cost-effective rope friction device designed for lowering timber or objects from an elevated position in a controlled manner.The user-friendly design can be mounted in either orientation and allows for a Stein 5:1 Hauler Kit to be attached so loads can either be raised prior to lowering or to assist in pre-tensioning the rigging line. The Invert-A-Wrap is fitted with replaceable Fairleads allowing for the rigging line to be tied off if required and also act as redirects so the user can operate the Invert-A-Wrap from a safe distance. For added protection the Invert-A-Wrap is fitted with a removable / replaceable protection rubber. This rubber helps protect the structure the device is mounted to and also covers and protects the product information which includes a unique serial number for traceability for inspections. LD750 The Stein LD750 Invert-A-Wrap is a cost-effective floating friction device designed for lowering timber or objects with rope from an elevated position in a controlled manner. The user-friendly design can be mounted in either orientation and allows for a Stein 5:1 Hauler Kit to be attached so loads can either be raised prior to lowering or to assist in pre-tensioning the rigging line. The Invert-A-Wrap is fitted with replaceable fairleads allowing for the rigging line to be tied off if required and also act as redirects so the user can operate the Invert-A-Wrap from a safe distance. For added protection the Invert-A-Wrap is fitted with a removable / replaceable protection rubber. This rubber helps protect the structure the device is mounted to and also covers and protects the product information which includes a unique serial number for traceability for inspections. LD1250 The Stein LD1250 Invert-A-Wrap is a cost-effective rope friction device designed for lowering timber / objects from an elevated position in a controlled manner.The user-friendly design can be mounted in either orientation and allows for a STEIN Hauler Kit to be attached so loads can either be raised prior to lowering or to assist in pre-tensioning the rigging line. The Invert-A-Wrap is fitted with replaceable Fairleads allowing for the rigging line to be tied off if required and also act as redirects so the user can operate the Invert-A-Wrap from a safe distance. For added protection the Invert-A-Wrap is fitted with a removable / replaceable protection rubber. This rubber helps protect the structure the device is mounted to and also covers and protects the product information which includes a unique serial number for traceability for inspections.

Regular price From $175.05
Regular price Sale price From $175.05
Unit price  per 
View product
Regular price $39.50
Regular price Sale price $39.50
Unit price  per 
Stein RCW-3001 Bollard And Winch System

Stein RCW-3001 Bollard And Winch System

STEIN's once named RC3001 with a detachable winch system that allows the operator to use the bollard independently of the winch and should a lifting process be required the winch can be attached within seconds with no tools required.   Details 6613.8 lbs (29.4 kN) WLL. 3/4 inch rope capacity. Since its launch in Europe in 2009 the STEIN RC3001 has proven to be one of the most respected, sought after lowering bollards on the market, used and trusted the world over.Now it has been upgraded to allow a Winch System to be fitted and will now known as the RCW-3001. Without compromising the integrity and features users have come to trust, the RCWINCH can be easily attached and detached during use without affecting the working line or the products performance. Not all rigging jobs require the facility of lifting capability! This simple option now allows the operator to use the bollard independently of the winch and should a lifting process be required the winch can be attached within seconds with no tools required. The RCWINCH can also be integrated into the system during a lowering procedure should it be required.Unlike other Winch Style Bollards the RCWINCH does not support the load during a lowering procedure; the load is supported on the bollard as the winch is attached to the lowering line independently through a friction hitch and winch line. This allows the load to be fully supported on the bollard and not the winch. Once the load has been winched to its desired position, the full weight is then easily transferred to the main rigging line, by reversing the winch and separating the two lines. At which point the suspended load can be safely lowered, independently and unimpeded by the winch.Although weighing in excess of 13kg excluding the winch and mounting straps it can be easily mounted by one person by utilizing the top attachment point as a suspension point and simply attaching the winch in seconds once the device is mounted.The large diameter drum easily accommodates working lines up to 19mm and has a working load limit of up to 3000kg (subject to mounting type). The drum has two sets of rope guides (fairleads) specially angled at 45-degrees which allows the operator to quickly add or subtract wraps.A specially designed ratchet strap with waterproof webbing securely attaches the device to the tree and can be backed up by securing an Anchor-Sling to the base anchor point. Supplied as standard with two heavy duty rubber inserts for use when tree protection is required.The RCW-3001 is probably the most user friendly and flexible Winching Bollard on the market to date.Kit Contains the following items: • 1 x RCW-3001 Lowering Device • 1 x RCWINCH Winch Kit • 1 x 10t Ratchet Handle (RC-P5000) • 1 x 5.8m Webbing (RC-P5001) • 1 x Pair of Protection Rubbers (RC-P5006)

Regular price $1,475.95
Regular price Sale price $1,475.95
Unit price  per 
STEIN RCW3001 Lowering Device

STEIN RCW3001 Lowering Device

 Units are on their way and will be here soon! Since its launch in 2009 the STEIN RC3001 has proven to be one of the most respected, sought after lowering bollards on the market, used and trusted the world over. For 2015 it has been upgraded to allow a Winch System to be fitted and will now be known as the RCW-3001. Without compromising the integrity and features users have come to trust, the RCWINCH can be easily attached and detached during use without affecting the working line or the products performance. Not all rigging jobs require the facility of lifting capability! This simple option now allows the operator to use the bollard independently of the winch and should a lifting process be required the winch can be attached within seconds with no tools required. The RCWINCH can also be integrated into the system during a lowering procedure should it be required. Unlike other Winch Style Bollards the RCWINCH does not support the load during a lowering procedure; the load is supported on the bollard as the winch is attached to the lowering line independently through a friction hitch and winch line. This allows the load to be fully supported on the bollard and not the winch. Once the load has been winched to its desired position, the full weight is then easily transferred to the main rigging line, by reversing the winch and separating the two lines. At which point the suspended load can be safely lowered, independently and unimpeded by the winch. Although weighing in excess of 13kg excluding the winch and mounting straps it can be easily mounted by one person by utilizing the top attachment point as a suspension point and simply attaching the winch in seconds once the device is mounted. The large diameter drum easily accommodates working lines up to 19mm and has a working load limit of up to 3000kg (subject to mounting type). The drum has two sets of rope guides (fairleads) specially angled at 45-degrees which allows the operator to quickly add or subtract wraps. A specially designed ratchet strap with waterproof webbing securely attaches the device to the tree and can be backed up by securing an Anchor-Sling to the base anchor point. Supplied as standard with two heavy duty rubber inserts for use when tree protection is required. The RCW-3001 is probably the most user friendly and flexible Winching Bollard on the market to date. The RCW-3001 & RCWINCH can be purchased as separate components or as a combination set SS-RCW3001-KITKit Contains the following items:1 x RCW-3001 Lowering Device1 x 10t Ratchet Handle (RC-P5000)1 x 5.8m Webbing (RC-P5001)1 x Pair of Protection Rubbers (RC-P5006)  

Regular price $779.99
Regular price Sale price $779.99
Unit price  per 
Regular price $11.05
Regular price Sale price $11.05
Unit price  per 
Stein Rubber Foot to fit all Poles
Regular price $4.95
Regular price Sale price $4.95
Unit price  per 
Regular price $36.95
Regular price Sale price $36.95
Unit price  per 
Regular price $65.95
Regular price Sale price $65.95
Unit price  per 
STEIN SMB1000 Lowering Bollard

STEIN SMB1000 Lowering Bollard

STEIN SMB1000 Fixed Lowering Device 1000kg WLL The STEIN SMB1000 single bollard lowering device has a WLL of 1000kg and designed to work effectively with ropes of up to 14mm (Recommended Rope - STEIN Omega 12mm or 14mm). The line is guided down to the bollard and managed by fairleads both front and rear. To help prevent damage to the tree the device is fitted with 2 replaceable heavy duty Tree Protection Rubbers made from a hardwearing blend of SBR/NR rubber. The device weighs in at just 4.4kg so can easily be mounted by one person utilising the top suspension point with the recommended STEIN Mounting Strap (SS-RCP6004). For added security it is recommended the device is backed up by securing a sling to the base anchor point terminated in a self-tightening hitch such as a cow-hitch or timber-hitch. (Recommended Sling - STEIN 20mm Multi-Sling SS-3372008005). Ratchet Strap Specifications Supplied with a specially designed ratchet strap fitted with Carbon Steel hooks with Keeper Pins to prevent the mounting hooks detaching from the device when not under tension. The webbing is made from a high tenacity 50mm wide polyester yarn and is UV resistant with a 6000kg breaking strength. This strapping system allows the device to be fitted to tree with a diameter of up to 145cm. The ratchet meets the requirements of the European Load Restraint Legislation Standard EN12195-2:2001 which requires the buckle to have a lashing capacity (LC) of 1000daN. This capacity is stamped on the ratchet together with a label for full traceability. The breaking strength (BS) of 2000Kg is also shown to indicate the maximum load that can be applied to the buckle before failure. STEIN SMB1000 SPECIFICATIONS Working Load Limit: Dimensions: Bollard Dimension: Materials: Fairleads: Body Finish: Bollard Finish: Rubbers: Rubber Material: Rubber Hardness: Strapping System: Webbing length: Weight: 1000kg (WLL) refer to manual 210mm (w) x 310mm (h) 73mm diameter x 140mm (l) Back Plate 5mm Steel 15mm Solid Bar Powder coated Lacquered with Rust Prevention 148mm (l) x 50mm (w) x 50mm (h) SBR/NR rubber 70 medium/hard (Shore A Scale) Ratchet Handle with tail 4.65m (5.0m combined with Ratchet Handle) 4.4kg (excluding Ratchet Strap) 5.8kg (Including Ratchet Strap)

Regular price $424.95
Regular price Sale price $424.95
Unit price  per 
Stein VEGA Plus VS2

Stein VEGA Plus VS2

The re-styled VEGA PLUS VS2 Arborist harness offers all the great qualities of the original VEGA Harness along with increased features and styling. The VEGA PLUS VS2 is an industry proven harness with over a decade of history; durable, ergonomically designed, practical Work Positioning Harness. Supplied in ECO Packaging (No Plastics) Features: Large back support for increased wearer comfort Quick release waist buckle, centrally located for comfort Two large side "D" for EN358 Work Positioning Webbing loops mounted on the Bridge Rings (EN813) Aluminium bridge connection rings (Replaceable) Webbing bridge with proven durability Two bridge rings as standard - designed for Twin Rope Systems Large semi-rigid leg loops for comfort Elasticated Leg Loop Adjusters Quick-release leg loop buckles Three reinforced large Gear Loops 8 Small Webbing Loops (U-CREATE System) Two nickel plated gear rings Large rear Tool Strop mounting point Rear elasticated holder for first aid pouch Harness ID Information located on rear of Back Support Standard: EN813:2008 | EN358:2018 | ASTM F887-18 | (UKCA Coming Soon) Maximum load 150kg (EN813 & EN358) European Manufactured Product Sizing:Hip Circumference: Size 1 = 76cm - 82cm Size 2 = 82cm - 90cm Size 3 = 90cm - 98cm SIZING:For user safety it is imperative to select the correct size of harness. Side attachment points (D`s) should ideally position just forward of the ASIS on the Hip Bone. Whilst testing the harness the users should select a suitable anchor point and using the forward attachment points (bridge ring) load the harness in both work position and suspension stances to ensure correct fit and support can be achieved. Side attachment points (D`s) on harnesses are designed for support and should not be used for unassisted suspension. These can be tested by attaching a suitable anchor to either side attachment points (D) and leaning back into the harness from a standing position.

Regular price $597.95
Regular price Sale price $597.95
Unit price  per 
View product
STEIN Wire Core Lanyard - No Hardware

STEIN Wire Core Lanyard - No Hardware

STEIN - Wire Core Work Positioning Lanyard Fully CE Certified for use with the STEIN Mini-Ropegrab SS-4922974400 to EN358:2018 Product Description and Application: The STEIN Work Positioning Lanyard is constructed using a 16-strand polyester outer sheath with a 6mm (7x19) steel wire core. Both ends of the Lanyard are terminated using a crimp with a plated thimble eye inserted. This Lanyard is designed as a work positioning device or restraint used in conjunction with an approved climbing system or as a standalone work positioning / restraint device. The device should never be used as a Fall Arrester or as part of a Fall Arrest System. The maximum rated load in accordance with these instructions is 100kg or a single user. Lanyards used for “restraint” should be of such a length that a fall situation cannot occur. Lanyards used in “work positioning” are designed to support the user when working at height and when needing a hands free environment. It may be necessary to supplement arrangements for work positioning or restraint with collective means (e.g. Safety Nets) or personal means (e.g. Fall Arrest Systems in accordance with EN363) of protection against falls from height. A Fall Arrest backup must be used if the user is not in “restraint” and there is a risk of a fall. An energy absorber must be fitted to the backup complying to EN355. The total length of a EN354 lanyard connected to an energy absorber including the energy absorber, terminations and connectors shall not exceed 2.0m. User Information Notice available from the DOWNLOAD Section

Regular price $82.50
Regular price Sale price $82.50
Unit price  per 
View product
Super Plasma Helmet By Kask
Super Plasma Helmet By Kask
Super Plasma Helmet By Kask
Super Plasma Helmet By Kask
Super Plasma Helmet By Kask
Super Plasma Helmet By Kask
Super Plasma Helmet By Kask

Super Plasma Helmet By Kask

Popular arborist helmet with durable liner that resists breaking even under hard impacts. The Super Plasma has great ventilation,a low profile, and sits comfortably on the head. A wide range of accessories help make this one of our most popular tree climbing helmets. The Super Plasma has 10 air intakes covered with aluminum anti-intrusion grille so that you get ventilation without debris getting in the helmet. Size is quickly adjustable with wheel adjustment. High Density ABS Plastic outer shell designed to withstand significant impact from the above or side (meeting CE standards). High Density (HD) Polystyrene inner shell has ducts for natural air flow and heat recycling. The inner padding consists of two different pieces (soft PE Polythene headband and disc) that are removable and washable. The liner is made of anti-allergic, odor-resistant fabric. Comes with adapters for mounting Peltor ear muffs (SAF205 - sold separately). Made in Italy. Sizing And Weight: Size: 20 - 25" (51 - 62cm) Weights: 350g (12.33oz) Features & Benefits Chin strap designed to reduce risk of losing helmet during a fall Shock absorbed by deformation of the high density ABS plastic shell Great ventilation Lightweight High density shell Low profile 6-point suspension Ear muff adapters Washable lining Accessories available Made in Italy Certifications ANSI Z89.1-2009 Type I Class C CE EN 12492

Regular price $130.00
Regular price Sale price $130.00
Unit price  per 
View product
Super Plasma Hi-Vis Helmet By Kask
Super Plasma Hi-Vis Helmet By Kask
Super Plasma Hi-Vis Helmet By Kask
Super Plasma Hi-Vis Helmet By Kask

Super Plasma Hi-Vis Helmet By Kask

Dramatic fluorescent colors and reflective decals make the hi-vis helmets easy to spot in all working conditions. Kask Super Plasma helmets are the 2nd generation of this helmet which has become popular for it's compactness, stability, and low profile. Fitting closer to the head than other helmets, the Super Plasma is compatible with a full range of eye and ear pro, including a visor which is custom-fit to the helmet to seal the top and keep out chips. The Plasma is lightweight, compact, comfortable and well ventilated with 10 air intakes that provide efficient cooling and ventilation. The air intakes on the outer shell are equipped with protective aluminum anti-intrusion grille that prevents entry of debris into the helmet. Size is quickly adjustable with wheel adjustment. The High Density ABS Plastic outer shell is designed to withstand significant impact from above or the side. The helmet's inner shell is made of High Density Polystyrene with removable, washable inner padding and liner made of anti-allergic, odor-resistant fabric. Sold with adapters for mounting Peltor ear muffs (SAF205). Sizing & Weight Size: 51-62cm (20-25") Weighs 350 g (12.33 oz) Features & Benefits: Chin strap designed to reduce risk of losing helmet during a fall Shock absorbed by deformation of the high density ABS plastic shell Great ventilation Lightweight High density shell Low profile 6-point suspension Ear muff adapters Washable lining Visor available Made in Italky

Regular price $140.00
Regular price Sale price $140.00
Unit price  per 
View product